Fortinet black logo

Administration Guide

Assigning a shaping profile

Assigning a shaping profile

You can assign an interface-based shaping profile for each device.

Note

To display this option, go to Device Manager > Device & Groups. From the dashboard toolbar, select Display Options, and then select the Interface checkbox.

To assign a shaping profile:
  1. Go to Device Manager > Device & Groups.
    1. In the tree menu, select the device group.
    2. Below the tree menu, select a device.
  2. In the dashboard toolbar, go to System > Interface.
  3. Select an interface from the list. The Edit Interface page opens.
  4. Toggle Shaping Profile to ON. The Egress and Ingress dropdowns are displayed.
  5. Select a shaping profile from the dropdown, and then click OK.

Assigning a shaping profile

You can assign an interface-based shaping profile for each device.

Note

To display this option, go to Device Manager > Device & Groups. From the dashboard toolbar, select Display Options, and then select the Interface checkbox.

To assign a shaping profile:
  1. Go to Device Manager > Device & Groups.
    1. In the tree menu, select the device group.
    2. Below the tree menu, select a device.
  2. In the dashboard toolbar, go to System > Interface.
  3. Select an interface from the list. The Edit Interface page opens.
  4. Toggle Shaping Profile to ON. The Egress and Ingress dropdowns are displayed.
  5. Select a shaping profile from the dropdown, and then click OK.