Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

Administration Guide

Adding SSID per-device mapping

To add SSID per-device mapping:
  1. Click Create New in the per-device mapping toolbar. The Per-Device Mapping dialog-box opens. Configure the following settings and click OK.

  2. Mapped Device

    Select the device to be mapped from the drop-down.

    Mapped IP/NetMask

    Specify the Mapped IP/NetMask.

    Mapped DHCP Server

    Set the DHCP Server to ON if you want to map a DHCP Server to this device.

     

    Address Range

    Configure address ranges for DHCP. Click Create to create a new range. Ranges can also be edited and deleted as required.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Netmask

    Enter the netmask.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Default Gateway

    Configure the default gateway: Same as Interface IP, or Specify. If set to Specify, enter the gateway IP address in the field.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    DNS Server

    Configure the DNS server: Same as System DNS, Same as Interface IP, or Specify.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Mode

    Select the DHCP mode: Server or Relay.

    This option is only available when DHCP Server is ON.

     

    NTP Server

    Configure the NTP server: Local, Same as System NTP, or Specify. If set to Specify, enter the NTP server IP address in the field.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Time Zone

    Configure the timezone: Disable, Same as System, or Specify. If set to Specify, select the timezone from the dropdown list.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Next Bootstrap Server

    Enter the IP address of the next bootstrap server.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Additional DHCP Options

    In the Lease Time field, enter the lease time, in seconds (default = 604800 (7 days)).

    Add DHCP options to the table. For details, see Adding additional DHCP options. Options can also be edited and deleted as required.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    MAC Reservation + Access Control

    Select the action to take with unknown MAC addresses: assign or block.

    Add MAC address actions to the table. For details, see Adding a MAC address reservation. Reservations can also be edited and deleted as required.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    DHCP Server IP

    Enter the DHCP server IP address.

    This option is only available when DHCP Server is ON and Mode is Relay.

     

    Type

    Select the type: Regular, or IPsec.

    This option is only available when DHCP Server is ON.

Adding SSID per-device mapping

To add SSID per-device mapping:
  1. Click Create New in the per-device mapping toolbar. The Per-Device Mapping dialog-box opens. Configure the following settings and click OK.

  2. Mapped Device

    Select the device to be mapped from the drop-down.

    Mapped IP/NetMask

    Specify the Mapped IP/NetMask.

    Mapped DHCP Server

    Set the DHCP Server to ON if you want to map a DHCP Server to this device.

     

    Address Range

    Configure address ranges for DHCP. Click Create to create a new range. Ranges can also be edited and deleted as required.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Netmask

    Enter the netmask.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Default Gateway

    Configure the default gateway: Same as Interface IP, or Specify. If set to Specify, enter the gateway IP address in the field.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    DNS Server

    Configure the DNS server: Same as System DNS, Same as Interface IP, or Specify.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Mode

    Select the DHCP mode: Server or Relay.

    This option is only available when DHCP Server is ON.

     

    NTP Server

    Configure the NTP server: Local, Same as System NTP, or Specify. If set to Specify, enter the NTP server IP address in the field.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Time Zone

    Configure the timezone: Disable, Same as System, or Specify. If set to Specify, select the timezone from the dropdown list.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Next Bootstrap Server

    Enter the IP address of the next bootstrap server.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    Additional DHCP Options

    In the Lease Time field, enter the lease time, in seconds (default = 604800 (7 days)).

    Add DHCP options to the table. For details, see Adding additional DHCP options. Options can also be edited and deleted as required.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    MAC Reservation + Access Control

    Select the action to take with unknown MAC addresses: assign or block.

    Add MAC address actions to the table. For details, see Adding a MAC address reservation. Reservations can also be edited and deleted as required.

    This option is only available when DHCP Server is ON and Mode is Server.

     

    DHCP Server IP

    Enter the DHCP server IP address.

    This option is only available when DHCP Server is ON and Mode is Relay.

     

    Type

    Select the type: Regular, or IPsec.

    This option is only available when DHCP Server is ON.