Fortinet black logo

Administration Guide

Assigned devices

Assigned devices

Assign a FortiGate device to an SD-WAN template. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.

To assign a FortiGate device to the SD-WAN template:
  1. Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
  2. Go to Device Manager > SD-WAN > Assigned Devices.
  3. Click Create New in the content pane toolbar, or right-click and select Create New.

    The Create New page opens.

  4. Select a FortiGate and WAN Template from the drop-down lists.

    The Interface Mapping table will be populated with the interface members that are in the selected template.

  5. Click OK.
To edit an assigned device:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > Assigned Devices.
  3. Select the assigned device from the list, and click Edit in the toolbar, or right-click the device and select Edit.

    The Edit page opens.

  4. Edit the FortiGate and WAN template as required, and click OK to apply your changes.
To delete an assigned device or devices:
  1. If using ADOMs, ensure that you are in the correct ADOM..
  2. Go to Device Manager > SD-WAN > Assigned Devices.
  3. Select the assigned device or devices from the list and click Delete in the toolbar, or right-click the device and select Delete.
  4. Click OK in the confirmation dialog box to delete the assigned device or devices.

Assigned devices

Assign a FortiGate device to an SD-WAN template. The network parameters specified in the SD-WAN template are used to measure the performance of the WAN link on the FortiGate device.

To assign a FortiGate device to the SD-WAN template:
  1. Ensure that you are in the correct ADOM and that central SD-WAN management is enabled.
  2. Go to Device Manager > SD-WAN > Assigned Devices.
  3. Click Create New in the content pane toolbar, or right-click and select Create New.

    The Create New page opens.

  4. Select a FortiGate and WAN Template from the drop-down lists.

    The Interface Mapping table will be populated with the interface members that are in the selected template.

  5. Click OK.
To edit an assigned device:
  1. If using ADOMs, ensure that you are in the correct ADOM.
  2. Go to Device Manager > SD-WAN > Assigned Devices.
  3. Select the assigned device from the list, and click Edit in the toolbar, or right-click the device and select Edit.

    The Edit page opens.

  4. Edit the FortiGate and WAN template as required, and click OK to apply your changes.
To delete an assigned device or devices:
  1. If using ADOMs, ensure that you are in the correct ADOM..
  2. Go to Device Manager > SD-WAN > Assigned Devices.
  3. Select the assigned device or devices from the list and click Delete in the toolbar, or right-click the device and select Delete.
  4. Click OK in the confirmation dialog box to delete the assigned device or devices.