config system cluster-sync
Configure FortiGate Session Life Support Protocol (FGSP) session synchronization.
config system cluster-sync
Description: Configure FortiGate Session Life Support Protocol (FGSP) session synchronization.
edit <sync-id>
set peervd {string}
set peerip {ipv4-address}
set syncvd <name1>, <name2>, ...
set down-intfs-before-sess-sync <name1>, <name2>, ...
set hb-interval {integer}
set hb-lost-threshold {integer}
set ipsec-tunnel-sync [enable|disable]
set slave-add-ike-routes [enable|disable]
config session-sync-filter
Description: Add one or more filters if you only want to synchronize some sessions. Use the filter to configure the types of sessions to synchronize.
set srcintf {string}
set dstintf {string}
set srcaddr {ipv4-classnet-any}
set dstaddr {ipv4-classnet-any}
set srcaddr6 {ipv6-network}
set dstaddr6 {ipv6-network}
config custom-service
Description: Only sessions using these custom services are synchronized. Use source and destination port ranges to define these custome services.
edit <id>
set src-port-range {user}
set dst-port-range {user}
next
end
end
next
end
config system cluster-sync
|
Parameter name |
Description |
Type |
Size |
||||||
|---|---|---|---|---|---|---|---|---|---|
|
peervd |
VDOM that contains the session synchronization link interface on the peer unit. Usually both peers would have the same peervd. |
string |
Maximum length: 31 |
||||||
|
peerip |
IP address of the interface on the peer unit that is used for the session synchronization link. |
ipv4-address |
Not Specified |
||||||
|
syncvd |
Sessions from these VDOMs are synchronized using this session synchronization configuration. VDOM name. |
string |
Maximum length: 79 |
||||||
|
down-intfs-before-sess-sync |
List of interfaces to be turned down before session synchronization is complete. Interface name. |
string |
Maximum length: 79 |
||||||
|
hb-interval |
Heartbeat interval (1 - 10 sec). |
integer |
Minimum value: 1 Maximum value: 10 |
||||||
|
hb-lost-threshold |
Lost heartbeat threshold (1 - 10). |
integer |
Minimum value: 1 Maximum value: 10 |
||||||
|
ipsec-tunnel-sync |
Enable/disable IPsec tunnel synchronization. |
option |
- |
||||||
|
|
|
||||||||
|
slave-add-ike-routes |
Enable/disable IKE route announcement on the backup unit. |
option |
- |
||||||
|
|
|
||||||||
config session-sync-filter
|
Parameter name |
Description |
Type |
Size |
|---|---|---|---|
|
srcintf |
Only sessions from this interface are synchronized. You can only enter one interface name. To synchronize sessions for multiple source interfaces, add multiple filters. |
string |
Maximum length: 15 |
|
dstintf |
Only sessions to this interface are synchronized. You can only enter one interface name. To synchronize sessions to multiple destination interfaces, add multiple filters. |
string |
Maximum length: 15 |
|
srcaddr |
Only sessions from this IPv4 address are synchronized. You can only enter one address. To synchronize sessions from multiple source addresses, add multiple filters. |
ipv4-classnet-any |
Not Specified |
|
dstaddr |
Only sessions to this IPv4 address are synchronized. You can only enter one address. To synchronize sessions for multiple destination addresses, add multiple filters. |
ipv4-classnet-any |
Not Specified |
|
srcaddr6 |
Only sessions from this IPv6 address are synchronized. You can only enter one address. To synchronize sessions from multiple source addresses, add multiple filters. |
ipv6-network |
Not Specified |
|
dstaddr6 |
Only sessions to this IPv6 address are synchronized. You can only enter one address. To synchronize sessions for multiple destination addresses, add multiple filters. |
ipv6-network |
Not Specified |
config custom-service
|
Parameter name |
Description |
Type |
Size |
|---|---|---|---|
|
src-port-range |
Custom service source port range. |
user |
Not Specified |
|
dst-port-range |
Custom service destination port range. |
user |
Not Specified |