config system ptp

Configure system PTP information.

config system ptp

Description: Configure system PTP information.

set status [enable|disable]

set mode [multicast|hybrid]

set delay-mechanism [E2E|P2P]

set request-interval {integer}

set interface {string}

end

config system ptp

Parameter name	Description	Type	Size
status	Enable/disable setting the FortiGate system time by synchronizing with an PTP Server.	option	-
	Option Description enable Enable synchronization with PTP Server. disable Disable synchronization with PTP Server.
mode	Multicast transmission or hybrid transmission.	option	-
	Option Description multicast Send PTP packets with multicast. hybrid Send PTP packets with unicast and multicast.
delay-mechanism	End to end delay detection or peer to peer delay detection.	option	-
	Option Description E2E End to end delay detection. P2P Peer to peer delay detection.
request-interval	The delay request value is the logarithmic mean interval in seconds between the delay request messages sent by the slave to the master.	integer	Minimum value: 1 Maximum value: 6
interface	PTP slave will reply through this interface.	string	Maximum length: 15