Fortinet Document Library

Version:

Version:

Version:

Version:

Version:

Version:

Version:

Version:


Table of Contents

CLI Reference

config web-proxy forward-server

Configure forward-server addresses.

config web-proxy forward-server

Description: Configure forward-server addresses.

edit <name>

set addr-type [ip|fqdn]

set ip {ipv4-address-any}

set fqdn {string}

set port {integer}

set healthcheck [disable|enable]

set monitor {string}

set server-down-option [block|pass]

set comment {string}

next

end

config web-proxy forward-server

Parameter name

Description

Type

Size

addr-type

Address type of the forwarding proxy server: IP or FQDN.

option

-

 

Option

Description

ip

Use an IP address for the forwarding proxy server.

fqdn

Use the FQDN for the forwarding proxy server.

ip

Forward proxy server IP address.

ipv4-address-any

Not Specified

fqdn

Forward server Fully Qualified Domain Name (FQDN).

string

Maximum length: 255

port

Port number that the forwarding server expects to receive HTTP sessions on (1 - 65535, default = 3128).

integer

Minimum value: 1 Maximum value: 65535

healthcheck

Enable/disable forward server health checking. Attempts to connect through the remote forwarding server to a destination to verify that the forwarding server is operating normally.

option

-

 

Option

Description

disable

Disable health checking.

enable

Enable health checking.

monitor

URL for forward server health check monitoring (default = http://www.google.com).

string

Maximum length: 255

server-down-option

Action to take when the forward server is found to be down: block sessions until the server is back up or pass sessions to their destination.

option

-

 

Option

Description

block

Block sessions until the server is back up.

pass

Pass sessions to their destination bypassing the forward server.

comment

Comment.

string

Maximum length: 63

config web-proxy forward-server

Configure forward-server addresses.

config web-proxy forward-server

Description: Configure forward-server addresses.

edit <name>

set addr-type [ip|fqdn]

set ip {ipv4-address-any}

set fqdn {string}

set port {integer}

set healthcheck [disable|enable]

set monitor {string}

set server-down-option [block|pass]

set comment {string}

next

end

config web-proxy forward-server

Parameter name

Description

Type

Size

addr-type

Address type of the forwarding proxy server: IP or FQDN.

option

-

 

Option

Description

ip

Use an IP address for the forwarding proxy server.

fqdn

Use the FQDN for the forwarding proxy server.

ip

Forward proxy server IP address.

ipv4-address-any

Not Specified

fqdn

Forward server Fully Qualified Domain Name (FQDN).

string

Maximum length: 255

port

Port number that the forwarding server expects to receive HTTP sessions on (1 - 65535, default = 3128).

integer

Minimum value: 1 Maximum value: 65535

healthcheck

Enable/disable forward server health checking. Attempts to connect through the remote forwarding server to a destination to verify that the forwarding server is operating normally.

option

-

 

Option

Description

disable

Disable health checking.

enable

Enable health checking.

monitor

URL for forward server health check monitoring (default = http://www.google.com).

string

Maximum length: 255

server-down-option

Action to take when the forward server is found to be down: block sessions until the server is back up or pass sessions to their destination.

option

-

 

Option

Description

block

Block sessions until the server is back up.

pass

Pass sessions to their destination bypassing the forward server.

comment

Comment.

string

Maximum length: 63