Config information
This page shows the information inside the configuration.
|
Setting |
Description |
|
Information of Configurations |
The configuration/device model name and firmware information of the source and target devices are shown in this table. Click the link of the configuration name to see the content. |
|
Target Device Switch Interface - Interface/Port |
If there are virtual switches in the selected target device, FortiConverter will list the member ports of the virtual switches. If an interface in the list is going to be used in the configuration, it should first be detached from the virtual switch. Click "X" on the interface to detach it. Please note that a detached interface cannot be re-added later by FortiConverter. |
|
Import options |
|
|
Target Device Switch Interface |
If the virtual switch interface is detected, FortiConverter can help to detach the interface before the interface mapping page. Please note, in FortiConverter, this is an irreversible operation, if you want to add the detached interface back, you have to go to the device to configure manually. |
|
Detect Messages |
Some warning or error messages detected in the parser would be shown in this table. If an error message occurs, users would be blocked from processing the conversion further. Users should fix the problem manually and restart a new conversion. |
|
Source Configuration Preview |
The number of type of objects are shown in the preview table. |