Juniper conversion wizard
|
The administrator password is not set on the new configuration. For third-party conversions, the trusted host settings are converted. Check the trusted host settings to ensure they allow management access from the relevant network interfaces. |
To start a new conversion
1. Start FortiConverter.
2. When start-up is complete, a browser window automatically opens to http://127.0.0.1:8000.
3. Click 
New Conversion, located at the top right corner.
4. Enter a name for the conversion configuration.
5. For Vendor, choose Juniper block.
6. Choose a Model, if applicable.
7. Click OK.
The configuration page opens to the Start page, and you can input your settings.