Fortinet black logo

online help

Palo Alto conversion wizard

Copy Link
Copy Doc ID a26371c3-75fd-11ea-9384-00505692583a:771801

Palo Alto conversion wizard

Caution

The administrator password is not set on the new configuration.

For third-party conversions, the trusted host settings are converted. Check the trusted host settings to ensure they allow management access from the relevant network interfaces.

To start a new conversion

1. Start FortiConverter.

2. When start-up is complete, a browser window automatically opens to http://127.0.0.1:8000.

3. Click New Conversion, located at the top right corner.

4. Enter a name for the conversion configuration.

5. For Vendor, choose PaloAlto block.

6. Choose a Model, if applicable.

7. Click OK.

The configuration page opens to the Start page, and you can input your settings.

Palo Alto conversion wizard

Caution

The administrator password is not set on the new configuration.

For third-party conversions, the trusted host settings are converted. Check the trusted host settings to ensure they allow management access from the relevant network interfaces.

To start a new conversion

1. Start FortiConverter.

2. When start-up is complete, a browser window automatically opens to http://127.0.0.1:8000.

3. Click New Conversion, located at the top right corner.

4. Enter a name for the conversion configuration.

5. For Vendor, choose PaloAlto block.

6. Choose a Model, if applicable.

7. Click OK.

The configuration page opens to the Start page, and you can input your settings.