Configuring FortiVoice to send faxes

1. Go to Call Feature > Fax > Sending Rule and click New.
2. Enter a Name and click Enable.
3. Under Dialed Number Match, click New.
4. Enter a Match Pattern number. This is the extension number pattern in your dial plan that can match many different numbers for sending faxes.

The following pattern matching syntax is supported, in order to match a wide range of potential numbers:

Syntax	Description
X	Matches any single digit from 0 to 9.
Z	Matches any single digit from 1 to 9.
N	Matches any single digit from 2 to 9.
[15-7]	Matches a single character from the range of digits specified. In this case, the pattern matches a single 1, as well as any number in the range 5, 6, 7.
.	Wildcard match; matches one or more characters, no matter what they are.
!	Wildcard match; matches zero or more characters, no matter what they are.

5. Enter any required Modification settings, such as stripping or appending prefixes or postfixes to the number pattern, and click Create.
6. Under Call Handling, click New.
7. Set the appropriate Schedule, Action, and Outgoing trunk and/or Caller ID modification for your dial plan requirements, to determine the call handling action for the numbers matching the configured number pattern.
8. Click Create, and Create again to finish configuring the Sending Rule.