Resolved issues
The following issues have been fixed in FortiSwitchOS 7.0.0. For inquiries about a particular bug, please contact Customer Service & Support.
Bug ID | Description |
---|---|
609939 | When the SNMP sever polls the switch for the SNMP attribute msgAuthoritativeEngineBoots, the switch returns 0. |
621628 | When there are parity errors, the FS-448D model has a high CPU usage. |
666841 | Setting the STP state on the port of a managed switch causes a memory leak. |
670281 | STP flaps for the ICL when it is part of a three-site FortiLink redundancy topology. |
672607 | The GUI does not force users to change their password on the first login. |
673433 |
Some 7-meter DAC cables cause traffic loss for the FS- 448E model. |
673673 | When a trusted host has been added to the administrator profile, the user cannot log in to the FortiSwitch CLI or GUI from FortiCloud. |
675444 | The fan speed of the FS-1048E was very high when the switch was running FortiSwitchOS 6.4.3. |
678608 | The FS-3032 and FS-1048 models have intermittent high traffic use in the internal interface. |
680477 | The timezone of the managed FortiSwitch unit is not synchronized with the timezone of the FortiGate device. |
682442 | Do not use FCLF8521P2BTL and FCLF852XP2BTL modules. They are not supported and can cause issues on the FortiSwitch unit. To find supported modules, refer to the FortiSwitch-Compatible Transceivers matrix. |
682642 | FortiSwitchOS sometimes does not communicate with the BCM PSE controller. |
683831 | The daemon for 802.1x port-based authentication crashed on the FS-448D-FPOE model. |
684986 | When a three-tier FortiLink MCLAG topology was configured, secondary FortiSwitch units in tier-2 and tier-3 go offline unexpectedly. |
685954 | When an Asian language (such as Japanese, Korean, or Chinese) is configured, the browser-based console stops responding. |
686172 | Jumbo frames are not supported on managed FortiSwitch units. |
687104 | 802.1x authentication stops suddenly on the FS-148E model. |
687698 | The quarantine VLAN changed from 4093 to 2 on a managed FortiSwitch unit. |
687889 | Remote login to FortiSwitch Cloud does not work when trusthost is configured for the user logging in remotely. |
688024 | There is a high packet loss when a FortiGate device is managing switches in an MCLAG-ICL topology. |
689572 | When FortiGate units in HA mode are managing FortiSwitch units, there are intermittent ping drops to the gateway. |
689854 | The session is removed after reauthentication when 802.1x port-based authentication with MAB enabled is configured. |
689959 | The 10G DAC link failed on an FS-148F model. |
693991 | The SFP module FG-TRAN-LX-C does not work well with the FSW-224E-POE model. |
694302 | When the FSR-112D model is in FortiLink mode, it does not forward multicast traffic to its uplink port. |
696552 | 802.1x RADIUS authentication stops working randomly on a managed FS-108E model. |
700800 |
When managed switches were upgraded from 6.2 to 6.4.6, some FS-112D-POE stayed offline until DHCP snooping was disabled. |
700934 | The average per interface value for the last day and the last week should not be the same. |
701196 | The root port for an Multiple Spanning Tree Protocol (MSTP) configuration was flapping. |
703982 | The PoE port mapping changed. |
703985 | An IP phone connected to port1 was delivering power to port8 instead. |
Common vulnerabilities and exposures
FortiSwitchOS 7.0.0 is no longer vulnerable to the following CVEs:
- CVE-2021-26111
- CWE-1104
Visit https://fortiguard.com/psirt for more information.