The following known issues have been identified with FortiSwitchOS 7.0.0. For inquiries about a particular bug or to report a bug, please contact Fortinet Customer Service & Support.
|382518, 417024, 417073, 417099, 438441||DHCP snooping and dynamic ARP inspection (DAI) do not work with private VLANs (PVLANs).|
|414972||IGMP snooping might not work correctly when used with 802.1x Dynamic VLAN functionality.|
|480605||When DHCP snooping is enabled on the FSR-112D-POE, the switched virtual interface (SVI) cannot get the IP address from the DHCP server.
—Use a static IP address in the SVI when DHCP snooping is enabled on that VLAN.
—Temporarily disable dhcp-snooping on vlan, issue the
|510943||The time-domain reflectometer (TDR) function (cable diagnostics feature) reports unexpected values.
Workaround: When using the cable diagnostics feature on a port (with the
|542031||For the 5xx switches, the
|548783||Some models support setting the mirror destination to “internal.” This is intended only for debugging purposes and might prevent critical protocols from operating on ports being used as mirror sources.|
|572052||Backup files from FortiSwitchOS 3.x that have 16-character-long passwords fail when restored on FortiSwitchOS 6.x. In FortiSwitchOS 6.x, file backups fail with passwords longer than 15 characters.
Workaround: Use passwords with a maximum of 15 characters for FortiSwitchOS 3.x and 6.x.
|585550||When packet sampling is enabled on an interface, packets that should be dropped by uRPF will be forwarded.|
|606044||The value for cable length is wrong when running cable diagnostics on the FS-108E, FS-124E, FS-108E-POE, FS-108E-FPOE, FS-124E-POE, FS-124E-FPOE, FS-148E, and FS-148E-POE models.|
|609375||The FortiSwitchOS supports four priority levels (critical, high, medium, and low); however, The SNMP Power Ethernet MIB only supports three levels. To support the MIB, a power priority of medium is returned as low for the PoE MIB.|
|610149||The results are inaccurate for open and short cables when running cable diagnostics on the FS-108E, FS-124E, FS-108E-POE, FS-108E-FPOE, FS-124E-POE, FS-124E-FPOE, FS-148E, and FS-148E-POE models.|
|617755||The internal interface cannot obtain IPv6 addresses with dhcpv6-snooping enabled on the native VLAN.|
|673433||Some 7-meter DAC cables cause traffic loss for the FS- 448E model.|
|704377||After adding and then removing