Resolved issues
The following issues have been fixed in FortiSwitchOS 7.2.7. For inquiries about a particular bug, please contact Customer Service & Support.
| Bug ID | Description |
|---|---|
| 942068 | After using a dynamic port policy to remove or add a port, the profile was not updated after the user logged out of the EAP session. |
| 959416 | There are log messages that the FS-108F-POE model reached or exceeded the warming temperature
threshold, but the diagnose sys pcb temp command shows that the switch temperature has not. |
| 973297 | The user cannot use the GUI to restore a configuration file that was backed up onto an FTP server. |
| 975605 | For FS-124F model only. When DHCP snooping is enabled, packets discovered from a DHCP client are dropped, instead of being forwarded to DHCP-trusted ports. |
| 981724 | Making any configuration change causes a BGP notification to be sent. |
| 984228 |
After upgrading to FortiSwitchOS 7.4.2, 7.4.1, 7.2.6, 7.2.5, or 7.0.7 , the management interface cannot be reached by ping or HTTPS. |
| 986166 | The FSW-2048F model cannot use auto-module (auto-negotiation) on 25G ports. |
| 989055 | The physical port of the FortiLink trunk flaps. This issue affects the FS-1024D, FS-1024E, FS-T1024E, FS-1048E, FS-2048E, and FS-3032E models. |
| 990277 | The daemon for 802.1X port-based authentication might crash when there is a high CPU load. |
| 992742 | Using the GUI to create an SNMP user fails. |