Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • Release Notes

    Home FortiSwitch 7.2.5 Release Notes
    7.2.5
    7.2.8
    7.2.7
    7.2.6
    7.2.5
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.2.0
    7.0.11
    7.0.10
    7.0.9
    7.0.8
    7.0.7
    7.0.6
    7.0.5
    7.0.4
    7.0.3
    7.0.2
    7.0.1
    7.0.0
    6.4.15
    6.4.14
    6.4.13
    6.4.12
    6.4.11
    6.4.10
    6.4.9
    6.4.8
    6.4.7
    6.4.6
    6.4.5
    6.4.4
    6.4.3
    6.4.2
    6.4.1
    6.4.0
    6.2.8
    6.2.7
    6.2.6
    6.2.5
    6.2.4
    6.2.3
    6.2.2
    6.2.1
    6.2.0
    6.0.7
    6.0.6
    6.0.5
    6.0.4
    6.0.3
    6.0.2
    6.0.1
    6.0.0
    3.6.12
    3.6.11
    3.6.10
    3.6.9
    3.6.8
    3.6.7
    3.6.6
    3.6.5
    3.6.4
    3.6.3
    3.6.2
    3.6.1
    3.6.0
    3.5.6
    3.5.5
    3.5.4
    3.5.3
    3.5.2
    3.5.1
    3.5.0
    3.4.3
    3.4.2
    3.4.1
    3.4.0
    3.3.3
    3.3.2
    3.3.1

    Resolved issues

    Resolved issues

    The following issues have been fixed in FortiSwitchOS 7.2.5. For inquiries about a particular bug, please contact Customer Service & Support.

    Bug ID Description
    860773 The output of the diagnose sys psu status command is wrong for the FSR-112D-POE model when both power supply units (PSUs) are connected and on.
    866288 ACLs should work correctly on the FS-3032E model.
    878762 A VLAN interface labeled mgmt causes the GUI to crash frequently.
    889987

    When the port descriptions are too long, a “500 Internal Server Error” is reported.
    891323 Going to the Router > Config > OSPF > Areas page results in an Internal Server Error.
    896010 The FS-524D and FS-524D-FPOE models will assign two split ports with the same physical MAC address.

    896925

    After configuring the set edge-port disabled command, “BPDU Guard: Resetting <interface_name>” is added to the log.

    897887

    After enabling the blocking of intra-VLAN traffic on the VLAN, the clients cannot reach the Internet.
    898637 The set poe-pre-standard-detect enable command does not work on the FS-124F-FPOE and FS-148F-FPOE models.

    902062

    After upgrading to FortiSwitchOS 7.2.2, the SFP link between the FS-124E model and the Calix E-9 System randomly turns off.

    902493

    The FS-148F-FPOE and FS-148F-POE models need to provide power over Ethernet (PoE) power to Cisco phones with Key Expansion Modules (KEMs).

    902910

    The 2048 key size generated certificate file shows the wrong key size in the CSR decoder.

    905384

    The IGMP-snooping daemon crashes on the FS-148F model.

    906594

    The GUI needs to support static IP/32.

    909353

    The FS-448E, FS-448E-POE, and FS-448E-FPOE models should provide the hardware status and temperature monitoring using the SNMP OIDs.
    910257 Going to System > Config > Firmware results in a “500 Internal Server Error.”
    917919 The GUI produces an “Internal server error” after an administrator user that is more than 35 characters long tries to log in.

    918017

    Using RSPAN on managed FSR-112D switches under FortiOS 7.0.11 causes network interruptions.

    921600

    Unplugging and then plugging in a PC connected to an FS-221E-POE model causes the STP state to change.

    922307

    The FN-TRAN-SFP-1BU10, FN-TRAN-SFP-1BD10, FN-TRAN-SFP-1BU40, and FN-TRAN-SFP-1BD40 transceivers need to support the auto-module port speed.
    Previous
    Next

    Resolved issues

    Resolved issues

    The following issues have been fixed in FortiSwitchOS 7.2.5. For inquiries about a particular bug, please contact Customer Service & Support.

    Bug ID Description
    860773 The output of the diagnose sys psu status command is wrong for the FSR-112D-POE model when both power supply units (PSUs) are connected and on.
    866288 ACLs should work correctly on the FS-3032E model.
    878762 A VLAN interface labeled mgmt causes the GUI to crash frequently.
    889987

    When the port descriptions are too long, a “500 Internal Server Error” is reported.
    891323 Going to the Router > Config > OSPF > Areas page results in an Internal Server Error.
    896010 The FS-524D and FS-524D-FPOE models will assign two split ports with the same physical MAC address.

    896925

    After configuring the set edge-port disabled command, “BPDU Guard: Resetting <interface_name>” is added to the log.

    897887

    After enabling the blocking of intra-VLAN traffic on the VLAN, the clients cannot reach the Internet.
    898637 The set poe-pre-standard-detect enable command does not work on the FS-124F-FPOE and FS-148F-FPOE models.

    902062

    After upgrading to FortiSwitchOS 7.2.2, the SFP link between the FS-124E model and the Calix E-9 System randomly turns off.

    902493

    The FS-148F-FPOE and FS-148F-POE models need to provide power over Ethernet (PoE) power to Cisco phones with Key Expansion Modules (KEMs).

    902910

    The 2048 key size generated certificate file shows the wrong key size in the CSR decoder.

    905384

    The IGMP-snooping daemon crashes on the FS-148F model.

    906594

    The GUI needs to support static IP/32.

    909353

    The FS-448E, FS-448E-POE, and FS-448E-FPOE models should provide the hardware status and temperature monitoring using the SNMP OIDs.
    910257 Going to System > Config > Firmware results in a “500 Internal Server Error.”
    917919 The GUI produces an “Internal server error” after an administrator user that is more than 35 characters long tries to log in.

    918017

    Using RSPAN on managed FSR-112D switches under FortiOS 7.0.11 causes network interruptions.

    921600

    Unplugging and then plugging in a PC connected to an FS-221E-POE model causes the STP state to change.

    922307

    The FN-TRAN-SFP-1BU10, FN-TRAN-SFP-1BD10, FN-TRAN-SFP-1BU40, and FN-TRAN-SFP-1BD40 transceivers need to support the auto-module port speed.
    Previous
    Next