APC UPS
What is Discovered and Monitored
|
Protocol |
Information Discovered |
Metrics collected |
Used for |
|---|---|---|---|
|
SNMP (V1, V2c) |
Host name, Hardware model, Network interfaces |
UPS metrics: Remaining battery charge, Battery status, Replace battery indicator, Time on battery, Output status, Output load, Output voltage, Output frequency |
Availability and Performance Monitoring |
|
SNMP Trap |
Availability and Performance Monitoring |
Event Types
In ADMIN > Device Support > Event Types, search for "apc" to see the event types associated with this device.
Rules
In RESOURCES > Rules, search for "apc" in the main content panel Search... field to see the rules associated with this device.
Reports
In RESOURCES > Reports, search for "apc" in the main content panel Search... field to see the reports associated with this device.
Configuration
SNMP
FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.
SNMP Trap
FortiSIEM processes events from this device via SNMP traps sent by the device. Configure the device to send send SNMP traps to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.
Setting Access Credentials
Set these Access Method Definition values to allow FortiSIEM to communicate with your device.
| Setting | Value |
|---|---|
| Name | <set name> |
| Device Type | APC UPS |
| Access Protocol | See Access Credentials |
| Port | See Access Credentials |
| Password config | See Password Configuration |