Fortinet black logo

External Systems Configuration Guide

Cisco Telepresence Multipoint Control Unit (MCU)

Cisco Telepresence Multipoint Control Unit (MCU)

What is Discovered and Monitored

The following protocols are used to discover and monitor various aspects of Cisco Tandeberg VCS

Protocol

Information discovered

Metrics collected

Used for

SNMP

Application type

System metrics: Uptime, Interface utilization

Performance Monitoring

Event Types

In ADMIN > Device Support > Event Types, search for "cisco telepresence" to see the event types associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide

Setting Access Credentials

SNMP Access Credentials for All Devices

Use these Access Method Definition settings to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting Value
Name <set name>
Device Type Generic
Access Protocol SNMP
Community String <your own>

Cisco Telepresence Multipoint Control Unit (MCU)

What is Discovered and Monitored

The following protocols are used to discover and monitor various aspects of Cisco Tandeberg VCS

Protocol

Information discovered

Metrics collected

Used for

SNMP

Application type

System metrics: Uptime, Interface utilization

Performance Monitoring

Event Types

In ADMIN > Device Support > Event Types, search for "cisco telepresence" to see the event types associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide

Setting Access Credentials

SNMP Access Credentials for All Devices

Use these Access Method Definition settings to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting Value
Name <set name>
Device Type Generic
Access Protocol SNMP
Community String <your own>