Ruckus Wireless LAN
What is Discovered and Monitored
|
Protocol |
Information Discovered |
Metrics collected |
Used for |
|---|---|---|---|
|
SNMP |
Controller host name, Controller hardware model, Controller network interfaces, Associated WLAN Access Points |
Controller Uptime, Controller Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Controller WLAN Statistics, Access Point Statistics, SSID performance Stats |
Availability and Performance Monitoring |
Event Types
-
PH_DEV_MON_RUCKUS_CONTROLLER_STAT
[PH_DEV_MON_RUCKUS_CONTROLLER_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=555,[hostName]=guest-zd-01,[hostIpAddr]=172.17.0.250,[numAp]=41,[numWlanClient]=121,[newRogueAP]=0,[knownRogueAP]=0,[wlanSentBytes]=0,[wlanRecvBytes]=0,[wlanSentBitsPerSec]=0.000000,[wlanRecvBitsPerSec]=0.000000,[lanSentBytes]=166848,[lanRecvBytes]=154704,[lanSentBitsPerSec]=7584.000000,[lanSentBitsPerSec]=7032.000000,[phLogDetail]=
-
PH_DEV_MON_RUCKUS_ACCESS_POINT_STAT
[PH_DEV_MON_RUCKUS_ACCESS_POINT_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=470,[hostName]=AP-10.20.30.3,[hostIpAddr]=10.20.30.3,[description]=,[numRadio]=0,[numWlanClient]=0,[knownRogueAP]=0,[connMode]=layer3,[firstJoinTime]=140467251729776,[lastBootTime]=140467251729776,[lastUpgradeTime]=140467251729776,[sentBytes]=0,[recvBytes]=0,[sentBitsPerSec]=0.000000,[recvBitsPerSec]=0.000000,[phLogDetail]=
-
PH_DEV_MON_RUCKUS_SSID_PERF
[PH_DEV_MON_RUCKUS_SSID_PERF]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=807,[hostName]=c1cs-guestpoint-zd-01,[hostIpAddr]=172.17.0.250,[wlanSsid]=GuestPoint,[description]=Welcome SSID for not yet authorized APs.,[wlanName]=Welcome SSID,[authenMethod]=open,[encryptAlgo]=none,[isGuest]=1,[srcVLAN]=598,[sentBytes]=0,[recvBytes]=0,[sentBitsPerSec]=0.000000,[recvBitsPerSec]=0.000000,[authSuccess]=0,[authFailure]=0,[assocSuccess]=0,[assocFailure]=0,[assocDeny]=0,[disassocAbnormal]=0,[disassocLeave]=0,[disassocMisc]=0,[phLogDetail]=
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
Configure the Controller so that FortiSIEM can connect to via SNMP.
Settings for Access Credentials
Set these Access Method Definition values to allow FortiSIEM to communicate with your device.
| Setting | Value |
|---|---|
| Name | <set name> |
| Device Type | Ruckus SmartOS WLAN AP |
| Access Protocol | See Access Credentials |
| Port | See Access Credentials |
| Password config | See Password Configuration |