Fortinet black logo

External Systems Configuration Guide

Liebert UPS

Liebert UPS

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, Hardware model, Network interfaces

UPS metrics: Remaining battery charge, Battery status, Time on battery, Estimated Seconds Remaining, Output voltage, Output current, Temperature

Availability and Performance Monitoring

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

SNMP

Note: UPS-MIB Required

Your device must include a UPS-MIB database to communicate with FortiSIEM.

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Liebert UPS
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Liebert UPS

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, Hardware model, Network interfaces

UPS metrics: Remaining battery charge, Battery status, Time on battery, Estimated Seconds Remaining, Output voltage, Output current, Temperature

Availability and Performance Monitoring

Event Types

There are no event types defined specifically for this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

SNMP

Note: UPS-MIB Required

Your device must include a UPS-MIB database to communicate with FortiSIEM.

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Liebert UPS
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration