Fortinet black logo

External Systems Configuration Guide

Ruckus Wireless LAN

Ruckus Wireless LAN

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP

Controller host name, Controller hardware model, Controller network interfaces, Associated WLAN Access Points

Controller Uptime, Controller Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Controller WLAN Statistics, Access Point Statistics, SSID performance Stats

Availability and Performance Monitoring

Event Types

  • PH_DEV_MON_RUCKUS_CONTROLLER_STAT

    [PH_DEV_MON_RUCKUS_CONTROLLER_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=555,[hostName]=guest-zd-01,[hostIpAddr]=172.17.0.250,[numAp]=41,[numWlanClient]=121,[newRogueAP]=0,[knownRogueAP]=0,[wlanSentBytes]=0,[wlanRecvBytes]=0,[wlanSentBitsPerSec]=0.000000,[wlanRecvBitsPerSec]=0.000000,[lanSentBytes]=166848,[lanRecvBytes]=154704,[lanSentBitsPerSec]=7584.000000,[lanSentBitsPerSec]=7032.000000,[phLogDetail]=
  • PH_DEV_MON_RUCKUS_ACCESS_POINT_STAT

    [PH_DEV_MON_RUCKUS_ACCESS_POINT_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=470,[hostName]=AP-10.20.30.3,[hostIpAddr]=10.20.30.3,[description]=,[numRadio]=0,[numWlanClient]=0,[knownRogueAP]=0,[connMode]=layer3,[firstJoinTime]=140467251729776,[lastBootTime]=140467251729776,[lastUpgradeTime]=140467251729776,[sentBytes]=0,[recvBytes]=0,[sentBitsPerSec]=0.000000,[recvBitsPerSec]=0.000000,[phLogDetail]=
  • PH_DEV_MON_RUCKUS_SSID_PERF

    [PH_DEV_MON_RUCKUS_SSID_PERF]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=807,[hostName]=c1cs-guestpoint-zd-01,[hostIpAddr]=172.17.0.250,[wlanSsid]=GuestPoint,[description]=Welcome SSID for not yet authorized APs.,[wlanName]=Welcome SSID,[authenMethod]=open,[encryptAlgo]=none,[isGuest]=1,[srcVLAN]=598,[sentBytes]=0,[recvBytes]=0,[sentBitsPerSec]=0.000000,[recvBitsPerSec]=0.000000,[authSuccess]=0,[authFailure]=0,[assocSuccess]=0,[assocFailure]=0,[assocDeny]=0,[disassocAbnormal]=0,[disassocLeave]=0,[disassocMisc]=0,[phLogDetail]=

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Configure the Controller so that FortiSIEM can connect to via SNMP.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Ruckus SmartOS WLAN AP
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Ruckus Wireless LAN

Ruckus Wireless LAN

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP

Controller host name, Controller hardware model, Controller network interfaces, Associated WLAN Access Points

Controller Uptime, Controller Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Controller WLAN Statistics, Access Point Statistics, SSID performance Stats

Availability and Performance Monitoring

Event Types

  • PH_DEV_MON_RUCKUS_CONTROLLER_STAT

    [PH_DEV_MON_RUCKUS_CONTROLLER_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=555,[hostName]=guest-zd-01,[hostIpAddr]=172.17.0.250,[numAp]=41,[numWlanClient]=121,[newRogueAP]=0,[knownRogueAP]=0,[wlanSentBytes]=0,[wlanRecvBytes]=0,[wlanSentBitsPerSec]=0.000000,[wlanRecvBitsPerSec]=0.000000,[lanSentBytes]=166848,[lanRecvBytes]=154704,[lanSentBitsPerSec]=7584.000000,[lanSentBitsPerSec]=7032.000000,[phLogDetail]=
  • PH_DEV_MON_RUCKUS_ACCESS_POINT_STAT

    [PH_DEV_MON_RUCKUS_ACCESS_POINT_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=470,[hostName]=AP-10.20.30.3,[hostIpAddr]=10.20.30.3,[description]=,[numRadio]=0,[numWlanClient]=0,[knownRogueAP]=0,[connMode]=layer3,[firstJoinTime]=140467251729776,[lastBootTime]=140467251729776,[lastUpgradeTime]=140467251729776,[sentBytes]=0,[recvBytes]=0,[sentBitsPerSec]=0.000000,[recvBitsPerSec]=0.000000,[phLogDetail]=
  • PH_DEV_MON_RUCKUS_SSID_PERF

    [PH_DEV_MON_RUCKUS_SSID_PERF]:[eventSeverity]=PHL_INFO,[fileName]=deviceRuckusWLAN.cpp,[lineNumber]=807,[hostName]=c1cs-guestpoint-zd-01,[hostIpAddr]=172.17.0.250,[wlanSsid]=GuestPoint,[description]=Welcome SSID for not yet authorized APs.,[wlanName]=Welcome SSID,[authenMethod]=open,[encryptAlgo]=none,[isGuest]=1,[srcVLAN]=598,[sentBytes]=0,[recvBytes]=0,[sentBitsPerSec]=0.000000,[recvBitsPerSec]=0.000000,[authSuccess]=0,[authFailure]=0,[assocSuccess]=0,[assocFailure]=0,[assocDeny]=0,[disassocAbnormal]=0,[disassocLeave]=0,[disassocMisc]=0,[phLogDetail]=

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Configure the Controller so that FortiSIEM can connect to via SNMP.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Ruckus SmartOS WLAN AP
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration