Fortinet black logo

External Systems Configuration Guide

Brocade ServerIron ADX

Brocade ServerIron ADX

What is Discovered and Monitored

Protocol

Information discovered

Metrics/Logs collected

Used for

SNMP

Host name, serial number, hardware (CPU, memory, network interface etc)

Uptime, CPU, Memory, Interface Utilization, Hardware status, Real Server Statistics

Performance/Availability Monitoring

Event Types

  • PH_DEV_MON_SYS_CPU_UTIL

    [PH_DEV_MON_SYS_CPU_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=434,[cpuName]=CPU,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[cpuUtil]=55.000000,[pollIntv]=176,[phLogDetail]=
     
  • PH_DEV_MON_SYS_MEM_UTIL

    [PH_DEV_MON_SYS_MEM_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=456,[memName]=Physical
    Memory,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[memUtil]=10.000000,[pollIntv]=176,[phLogDetail]=
     
  • PH_DEV_MON_NET_INTF_UTIL

    [PH_DEV_MON_NET_INTF_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=phIntfFilter.cpp,[lineNumber]=323,[intfName]=GigabitEthernet8,[intfAlias]=,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[pollIntv]=56,[recvBytes64]=1000000,[recvBitsPerSec]=142857.142857,[inIntfUtil]=0.014286,[sentBytes64]=2000000,[sentBitsPerSec]=285714.285714,[outIntfUtil]=0.028571,[recvPkts64]=0,[sentPkts64]=0,[inIntfPktErr]=0,[inIntfPktErrPct]=0.000000,[outIntfPktErr]=0,[outIntfPktErrPct]=0.000000,[inIntfPktDiscarded]=0,[inIntfPktDiscardedPct]=0.000000,[outIntfPktDiscarded]=0,[outIntfPktDiscardedPct]=0.000000,[outQLen64]=0,[intfInSpeed64]=1000000000,[intfOutSpeed64]=1000000000,[intfAdminStatus]=up,[intfOperStatus]=up,[daysSinceLastUse]=0,[totIntfPktErr]=0,[totBitsPerSec]=428571.428571,[phLogDetail]=
    
    
  • PH_DEV_MON_SERVERIRON_REAL_SERVER_STAT

     [PH_DEV_MON_SERVERIRON_REAL_SERVER_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=507,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[realServerIpAddr]=10.120.10.131,[realServerState]=7,[failedPortExists]=2,[openConnectionsCount]=2,[peakConns]=114,[activeSessions]=4,[phLogDetail]=
     
  • PH_DEV_MON_HW_STATUS

    [PH_DEV_MON_HW_STATUS]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=359,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[hwStatusCode]=2,[hwPowerSupplyStatus]=0,[hwTempSensorStatus]=2,[hwFanStatus]=0,[phLogDetail]=
    
    [PH_DEV_MON_HW_STATUS_TEMP_CRIT]:[eventSeverity]=PHL_CRITICAL,[fileName]=device.cpp,[lineNumber]=13812,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[hwStatusCode]=2,[hwComponentName]=1-Temperature
    sensor,[hwComponentStatus]=Critical,[phLogDetail]=
     
  • PH_DEV_MON_HW_TEMP

     [PH_DEV_MON_HW_TEMP]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=401,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[hwComponentName]=Temp1,[envTempDegF]=90,[phLogDetail]=

Rules

There are no predefined rules for this device other than covered by generic network devices.

Reports

There are no predefined reports for this device other than covered by generic network devices.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Brocade ServerIron ADX
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Brocade ServerIron ADX

What is Discovered and Monitored

Protocol

Information discovered

Metrics/Logs collected

Used for

SNMP

Host name, serial number, hardware (CPU, memory, network interface etc)

Uptime, CPU, Memory, Interface Utilization, Hardware status, Real Server Statistics

Performance/Availability Monitoring

Event Types

  • PH_DEV_MON_SYS_CPU_UTIL

    [PH_DEV_MON_SYS_CPU_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=434,[cpuName]=CPU,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[cpuUtil]=55.000000,[pollIntv]=176,[phLogDetail]=
     
  • PH_DEV_MON_SYS_MEM_UTIL

    [PH_DEV_MON_SYS_MEM_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=456,[memName]=Physical
    Memory,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[memUtil]=10.000000,[pollIntv]=176,[phLogDetail]=
     
  • PH_DEV_MON_NET_INTF_UTIL

    [PH_DEV_MON_NET_INTF_UTIL]:[eventSeverity]=PHL_INFO,[fileName]=phIntfFilter.cpp,[lineNumber]=323,[intfName]=GigabitEthernet8,[intfAlias]=,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[pollIntv]=56,[recvBytes64]=1000000,[recvBitsPerSec]=142857.142857,[inIntfUtil]=0.014286,[sentBytes64]=2000000,[sentBitsPerSec]=285714.285714,[outIntfUtil]=0.028571,[recvPkts64]=0,[sentPkts64]=0,[inIntfPktErr]=0,[inIntfPktErrPct]=0.000000,[outIntfPktErr]=0,[outIntfPktErrPct]=0.000000,[inIntfPktDiscarded]=0,[inIntfPktDiscardedPct]=0.000000,[outIntfPktDiscarded]=0,[outIntfPktDiscardedPct]=0.000000,[outQLen64]=0,[intfInSpeed64]=1000000000,[intfOutSpeed64]=1000000000,[intfAdminStatus]=up,[intfOperStatus]=up,[daysSinceLastUse]=0,[totIntfPktErr]=0,[totBitsPerSec]=428571.428571,[phLogDetail]=
    
    
  • PH_DEV_MON_SERVERIRON_REAL_SERVER_STAT

     [PH_DEV_MON_SERVERIRON_REAL_SERVER_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=507,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[realServerIpAddr]=10.120.10.131,[realServerState]=7,[failedPortExists]=2,[openConnectionsCount]=2,[peakConns]=114,[activeSessions]=4,[phLogDetail]=
     
  • PH_DEV_MON_HW_STATUS

    [PH_DEV_MON_HW_STATUS]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=359,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[hwStatusCode]=2,[hwPowerSupplyStatus]=0,[hwTempSensorStatus]=2,[hwFanStatus]=0,[phLogDetail]=
    
    [PH_DEV_MON_HW_STATUS_TEMP_CRIT]:[eventSeverity]=PHL_CRITICAL,[fileName]=device.cpp,[lineNumber]=13812,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[hwStatusCode]=2,[hwComponentName]=1-Temperature
    sensor,[hwComponentStatus]=Critical,[phLogDetail]=
     
  • PH_DEV_MON_HW_TEMP

     [PH_DEV_MON_HW_TEMP]:[eventSeverity]=PHL_INFO,[fileName]=deviceBrocadeServerIron.cpp,[lineNumber]=401,[hostName]=lb1-1008-qts,[hostIpAddr]=10.120.3.15,[hwComponentName]=Temp1,[envTempDegF]=90,[phLogDetail]=

Rules

There are no predefined rules for this device other than covered by generic network devices.

Reports

There are no predefined reports for this device other than covered by generic network devices.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Brocade ServerIron ADX
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration