Configuring a DLP sensor profile

Here, we configure a DLP sensor profile with a DLP filter rule that blocks JavaScript files. The DLP file pattern for JavaScript files was configured in Configuring the DLP file pattern.

To configure a DLP sensor profile:

1. Go to Secret Settings > Data Leak Prevention.
2. From the DLP sensors list, select Create New.

   The New DLP Sensor window opens.

3. In Name, enter the name for the DLP sensor.
4. In the Rules pane, select Create New to create a new DLP filter rule.

   The Create New Dlp Filter Rule window opens.

5. In Name, enter a name for the DLP filter rule.
6. In the Severity dropdown, select Medium.
7. In the Filter By drodown, select Match a DLP File Pattern.
8. In the File Pattern dropdown, select the DLP file pattern (by ID) created in Configuring the DLP file pattern.
9. In the Protocols dropdown:
   1. Select +.
   2. In the Select Entries window, select HTTP-GET and HTTP-POST.
   3. Click Close.
10. In Action, select Block.
11. Click OK.
12. Click OK.