Scans

Th Scans panel displays information about recent scans.

This panel may display different data than Scan Results, because information in the panel is retrieved from a different database. The Scans panel is also not affected by the scheduled archive and purge of scans. For more information, see Scan results view .

Use the Chart drop-down list to switch between Scans Per Day, Scans Per Hour, and Total Scans.

Use the Show options to select which scans to display from the following options:

• Passed: Scans that ran and the host passed.
• Failed: Scans that ran and the host failed. This includes scans that are set to Failure Pending.
• Script Failed: Scan that tried to run but failed before determining the state of the host.
• Warning: Scan determined that the host failed the scan policy and an administrator received a warning.

Use Chart Type to select whether to display a Line or Stacked Bar chart.

To filter data, do the following:

1. Click Set Filter.

2. If required, enable Type and select one of the following options:

   • SMA: Scans performed by the Dissolvable Agent
   • System: Scans performed by the system, based on the following scripts: ForceCSARescan, ForcePersistentAgent, PassAllClients, and FallAllClients.
   • SMA Agent: Sans performed by the Persistent Agent
   • Agent Monitor: Custom scans
3. If required, enable Platform and select an operating system.
4. If requred, enable Scan and select a scan by name.
5. Click OK.

Filter options are saved for each administrator.