View configurations for device groups

You can view configuration information for devices in a group on the Device Manager tab.

To view configurations:

1. Go to Device Manager > Device & Groups.
2. In the tree menu, click the device group name, for example, Managed Devices. The devices in the group are displayed in the content pane.

   The following columns are displayed. You can filter columns that have a Filter icon.

   Device Name	The name of the device and its connectivity status.
   Config Status	See the table below for config status details.
   Policy Package Status	See the table below for policy package status details. Click on the policy package name to go to view and manage the package (see Managing policy packages).
   Host Name	The host name for the device (available for managed devices).
   IP Address	The IP address of the device.
   Platform	The platform of the device (available for managed devices).
   Description	Description of the device.
   HA Status	The HA status of the device.
   FortiGuard License	Status of the FortiGuard license for the device.
   Firmware Version	The firmware version.
   Management Mode	Management mode of the device.
   SN	The serial number of the device.
   Controller Counter	The number of each device type controlled by this device, such as FortiAPs and FortiSwitches.
   Company/Organization	The company or organization information.
   Country	The country where the device is located.
   Province/State	The province or state.
   City	The city.
   Contact	The contact information.

   The following table identifies the different available config statuses.

   Config Status	Icon	Description
   Synchronized	Green check	Configurations are synchronized between FortiManager and the managed device.
   Modified	Yellow triangle	Configurations are modified on FortiManager and not synchronized between FortiManager and the managed device.
   Auto-update	Green check	Configurations modified on the managed device are auto synced to FortiManager.
   Modified (recent auto-updated)	Yellow triangle	Configurations are modified on FortiManager and configurations modified on the managed device are auto synced to FortiManager.
   Out of Sync	Red X	Configurations are modified on the managed device and not synced to FortiManager.
   Conflict	Red X	When one of the following happens: Install failed Configurations are modified on both FortiManager and the managed device, and not auto synced to FortiManager.
   Unknown	Gray question mark	When one of the following happens: Connection goes down No revision is generated, like added model device

   The following table identifies the different available policy package statuses.

   Policy Package Status	Icon	Description
   Imported	Green check	Policies and objects are imported into FortiManager.
   Synchronized	Green check	Policies and objects are synchronized between FortiManager and the managed device.
   Modified	Yellow triangle	Policies or objects are modified on FortiManager.
   Out of Sync	Red X	Policies or objects are modified on the managed device.
   Unknown with policy package name	Gray question mark	Configurations of the managed device are retrieved on FortiManager after being imported/installed.
   Never Installed	Yellow triangle	The assigned policy package is not the result of an import for this device, and the package has not been installed since it has been assigned to this device.