Supported connectors overview

The following is an overview of how to add supported connectors to the Security Fabric:

1. In FortiOS, ensure Security Fabric is enabled, and prepare the root FortiGate for communication with supported Security Fabric devices. See Preparing FortiGate for supported Security Fabric devices.

2. (Optional) Configure pre-authorization of the supported Security Fabric device. See Configuring pre-authorization of supported Security Fabric devices.

3. On the supported Security Fabric device, configure the device to join the Security Fabric. See:

   • Configuring FortiDeceptor
   • Configuring FortiMail
   • Configuring FortiMonitor
   • Configuring FortiNAC
   • Configuring FortiNDR
   • Configuring FortiPolicy
   • Configuring FortiTester
   • Configuring FortiVoice
   • Configuring FortiWeb

4. Wait for the supported Security Fabric device to establish a connection with the root FortiGate in the Security Fabric.

5. In FortiOS, authorize the supported Security Fabric device. See Authorizing supported connectors.

   If the supported device is pre-authorized, you can skip this step.

6. In FortiOS, go to Security Fabric > Physical Topology or Security Fabric > Logical Topology to view information about the authorized device.