Fields for identifying traffic

This topic describes the fields in an SD-WAN rule used for defining the traffic to which the rule applies. Some fields are available only in the CLI.

SD-WAN rules can identify traffic by a variety of means:

In the GUI, go to Network > SD-WAN > SD-WAN Rules. Click Create New, or double-click an existing rule to open it for editing. The Source and Destination sections are used to identify traffic for the rule:

In the CLI, edit the service definition ID number to identify traffic for the rule:

config system sdwan
    config service
        edit <ID>
        <CLI commands from the following tables> 
        ...
    end
end

The following table describes the fields used for the name, ID, and IP version of the SD-WAN rule:

config system sdwan
    config service
        edit <ID>
        next 
    end
end

The following table describes the fields used for source section of the SD-WAN rule:

The following table describes the fields used for the destination section of the SD-WAN rule:

By default, individual applications and application groups cannot be selected in SD-WAN rules. To enable this functionality in the GUI, go to System > Feature Visibility and enable Application Detection Based SD-WAN. In the CLI, enter:

config system global
    set gui-app-detection-sdwan enable
end