config icap server

Configure ICAP servers.

config icap server

Description: Configure ICAP servers.

edit <name>

set addr-type [ip4|ip6|...]

set ip-address {ipv4-address-any}

set ip6-address {ipv6-address}

set fqdn {string}

set port {integer}

set max-connections {integer}

set secure [disable|enable]

set ssl-cert {string}

set healthcheck [disable|enable]

set healthcheck-service {string}

next

end

config icap server

Parameter	Description	Type	Size	Default
addr-type	Address type of the remote ICAP server: IPv4, IPv6 or FQDN.	option	-	ip4
	Option Description ip4 Use an IPv4 address for the remote ICAP server. ip6 Use an IPv6 address for the remote ICAP server. fqdn Use the FQDN for the forwarding proxy server.
ip-address	IPv4 address of the ICAP server.	ipv4-address-any	Not Specified	0.0.0.0
ip6-address	IPv6 address of the ICAP server.	ipv6-address	Not Specified	::
fqdn	ICAP remote server Fully Qualified Domain Name (FQDN).	string	Not Specified
port	ICAP server port.	integer	Minimum value: 1 Maximum value: 65535	1344
max-connections	Maximum number of concurrent connections to ICAP server . Must not be less than wad-worker-count.	integer	Minimum value: 0 Maximum value: 4294967295	100
secure	Enable/disable secure connection to ICAP server.	option	-	disable
	Option Description disable Disable connection to secure ICAP server. enable Enable connection to secure ICAP server.
ssl-cert	CA certificate name.	string	Not Specified
healthcheck	Enable/disable ICAP remote server health checking. Attempts to connect to the remote ICAP server to verify that the server is operating normally.	option	-	disable
	Option Description disable Disable health checking. enable Enable health checking.
healthcheck-service	ICAP Service name to use for health checks.	string	Not Specified