Fortinet black logo

Cookbook

Enable dynamic connector addresses in SD-WAN policies

Copy Link
Copy Doc ID 9bd2f947-ece6-11ec-bb32-fa163e15d75b:267355
Download PDF

Enable dynamic connector addresses in SD-WAN policies

Dynamic Fabric Connector addresses can be used in SD-WAN policies.

To add a dynamic connector address to an SD-WAN rule:
  1. Go to Network > SD-WAN Rules.
  2. Click Create New.
  3. In the Name field, enter the rule name.
  4. In the Destination > Addresses field, click the +. The Select Entries pane will appear.
  5. In the Select Entries pane, select the dynamic connector (in the example, aws1).

  6. Configure the remaining settings as required.
  7. Click OK to save the rule.

Enable dynamic connector addresses in SD-WAN policies

Dynamic Fabric Connector addresses can be used in SD-WAN policies.

To add a dynamic connector address to an SD-WAN rule:
  1. Go to Network > SD-WAN Rules.
  2. Click Create New.
  3. In the Name field, enter the rule name.
  4. In the Destination > Addresses field, click the +. The Select Entries pane will appear.
  5. In the Select Entries pane, select the dynamic connector (in the example, aws1).

  6. Configure the remaining settings as required.
  7. Click OK to save the rule.