Add a new operator/carrier
An SIM map entry is used to get the carrier from the PLMN. Most PLMNs are supported in the default configuration. You can always check if your SIM PLMN is supported using the following command:
FX511FTQ21001262 # get lte carrier Usage: get lte carrier mcc-number mnc-number
If you cannot find the carrier of your SIM card, you can add a customized SIM using the following commands:
FX511FTQ21001262 # config lte simmap
FX511FTQ21001262 (simmap) # show
config lte simmap
end
FX511FTQ21001262 (simmap) # edit 1
FX511FTQ21001262 (1) <M> # show
edit 1
set mcc
set mnc
set carrier
next
|
The new operator/carrier requires at least one matched carrier profile entry from |