Configure LAN switch

FortiExtender comes with four LAN ports (i.e., Ports 1—4) which can be part of the same LAN switch. These ports can also be separated from the LAN switch to run on different IP subnets as well.

To display the current LAN switch configuration:

FX211E5919000011 # config system lan-switch 
FX211E5919000011 (lan-switch) # config ports 
FX211E5919000011 (ports) # show 
config system lan-switch ports
    edit port1
    next
    edit port2
    next
    edit port3
    next
    edit port4
    next
end

To remove Port 4 from the LAN switch in the example above:

FX211E5919000011 (ports) # delete port4
FX211E5919000011 (ports) <M> # next 
FX211E5919000011 (ports) # show 
config system lan-switch ports
    edit port1
    next
    edit port2
    next
    edit port3
    next
end

To add Port 4 back to the LAN switch from the state above:

FX211E5919000011 (ports) # edit port4
FX211E5919000011 (port4) <M> # next 
FX211E5919000011 (ports) # show 
config system lan-switch ports
    edit port1
    next
    edit port2
    next
    edit port3
    next
    edit port4
    next
end