Initial Configuration
After setting up and mounting the appliance on the rack, connect to the FortiAIOps 500G CLI using the console port and perform the following steps. See, FortiAIOps 500G Quick Start Guide.
-
On the console Log in as an admin user with the username admin. A password is not required. You will be prompted to configure a new password after the initial login.
This CLI password is same as the GUI password. The default username for logging into GUI is admin and there is no password.
-
Verify the dynamically assigned IP address using the command:
get system interface -
Configure a static IP address (recommended) using the command:
config system interface
For a complete list of supported CLI commands, see Command Line Interface (CLI) Reference.