config firewall central-snat-map

Configure central SNAT policies.

config firewall central-snat-map

Description: Configure central SNAT policies.

edit <policyid>

set status [enable|disable]

set orig-addr <name1>, <name2>, ...

set srcintf <name1>, <name2>, ...

set dst-addr <name1>, <name2>, ...

set dstintf <name1>, <name2>, ...

set nat-ippool <name1>, <name2>, ...

set protocol {integer}

set orig-port {user}

set nat-port {user}

set nat [disable|enable]

set comments {var-string}

next

end

config firewall central-snat-map

Parameter	Description	Type	Size
status	Enable/disable the active status of this policy.	option	-
	Option Description enable Enable this policy. disable Disable this policy.
orig-addr <name>	Original address. Address name.	string	Maximum length: 79
srcintf <name>	Source interface name from available interfaces. Interface name.	string	Maximum length: 79
dst-addr <name>	Destination address name from available addresses. Address name.	string	Maximum length: 79
dstintf <name>	Destination interface name from available interfaces. Interface name.	string	Maximum length: 79
nat-ippool <name>	Name of the IP pools to be used to translate addresses from available IP Pools. IP pool name.	string	Maximum length: 79
protocol	Integer value for the protocol type .	integer	Minimum value: 0 Maximum value: 255
orig-port	Original TCP port (0 to 65535).	user	Not Specified
nat-port	Translated port or port range (0 to 65535).	user	Not Specified
nat	Enable/disable source NAT.	option	-
	Option Description disable Disable source NAT. enable Enable source NAT.
comments	Comment.	var-string	Not Specified