Fortinet white logo
Fortinet white logo

CLI Reference

config wireless-controller global

config wireless-controller global

Configure wireless controller global settings.

config wireless-controller global

Description: Configure wireless controller global settings.

set name {string}

set location {string}

set image-download [enable|disable]

set max-retransmit {integer}

set control-message-offload {option1}, {option2}, ...

set data-ethernet-II [enable|disable]

set link-aggregation [enable|disable]

set mesh-eth-type {integer}

set fiapp-eth-type {integer}

set discovery-mc-addr {ipv4-address-multicast}

set max-clients {integer}

set rogue-scan-mac-adjacency {integer}

set ipsec-base-ip {ipv4-address}

set wtp-share [enable|disable]

set ap-log-server [enable|disable]

set ap-log-server-ip {ipv4-address}

set ap-log-server-port {integer}

end

config wireless-controller global

Parameter

Description

Type

Size

name

Name of the wireless controller.

string

Not Specified

location

Description of the location of the wireless controller.

string

Not Specified

image-download

Enable/disable WTP image download at join time.

option

-

Option

Description

enable

Enable WTP image download at join time.

disable

Disable WTP image download at join time.

max-retransmit

Maximum number of tunnel packet retransmissions .

integer

Minimum value: 0 Maximum value: 64

control-message-offload

Configure CAPWAP control message data channel offload.

option

-

Option

Description

ebp-frame

Ekahau blink protocol (EBP) frames.

aeroscout-tag

AeroScout tag.

ap-list

Rogue AP list.

sta-list

Rogue STA list.

sta-cap-list

STA capability list.

stats

WTP, radio, VAP, and STA statistics.

aeroscout-mu

AeroScout Mobile Unit (MU) report.

sta-health

STA health log.

data-ethernet-II

Configure the wireless controller to use Ethernet II or 802.3 frames with 802.3 data tunnel mode .

option

-

Option

Description

enable

Use Ethernet II frames with 802.3 data tunnel mode.

disable

Use 802.3 Ethernet frames with 802.3 data tunnel mode.

link-aggregation

Enable/disable calculating the CAPWAP transmit hash to load balance sessions to link aggregation nodes .

option

-

Option

Description

enable

Enable calculating the CAPWAP transmit hash.

disable

Disable calculating the CAPWAP transmit hash.

mesh-eth-type

Mesh Ethernet identifier included in backhaul packets .

integer

Minimum value: 8755 Maximum value: 8755

fiapp-eth-type

Ethernet type for Fortinet Inter-Access Point Protocol .

integer

Minimum value: 5252 Maximum value: 5252

discovery-mc-addr

Multicast IP address for AP discovery .

ipv4-address-multicast

Not Specified

max-clients

Maximum number of clients that can connect simultaneously .

integer

Minimum value: 0 Maximum value: 4294967295

rogue-scan-mac-adjacency

Maximum numerical difference between an AP's Ethernet and wireless MAC values to match for rogue detection .

integer

Minimum value: 0 Maximum value: 31

ipsec-base-ip

Base IP address for IPsec VPN tunnels between the access points and the wireless controller .

ipv4-address

Not Specified

wtp-share

Enable/disable sharing of WTPs between VDOMs.

option

-

Option

Description

enable

WTP can be shared between all VDOMs.

disable

WTP can be used only in its own VDOM.

ap-log-server

Enable/disable configuring APs or FortiAPs to send log messages to a syslog server .

option

-

Option

Description

enable

Enable AP log server.

disable

Disable AP log server.

ap-log-server-ip

IP address that APs or FortiAPs send log messages to.

ipv4-address

Not Specified

ap-log-server-port

Port that APs or FortiAPs send log messages to.

integer

Minimum value: 0 Maximum value: 65535

config wireless-controller global

config wireless-controller global

Configure wireless controller global settings.

config wireless-controller global

Description: Configure wireless controller global settings.

set name {string}

set location {string}

set image-download [enable|disable]

set max-retransmit {integer}

set control-message-offload {option1}, {option2}, ...

set data-ethernet-II [enable|disable]

set link-aggregation [enable|disable]

set mesh-eth-type {integer}

set fiapp-eth-type {integer}

set discovery-mc-addr {ipv4-address-multicast}

set max-clients {integer}

set rogue-scan-mac-adjacency {integer}

set ipsec-base-ip {ipv4-address}

set wtp-share [enable|disable]

set ap-log-server [enable|disable]

set ap-log-server-ip {ipv4-address}

set ap-log-server-port {integer}

end

config wireless-controller global

Parameter

Description

Type

Size

name

Name of the wireless controller.

string

Not Specified

location

Description of the location of the wireless controller.

string

Not Specified

image-download

Enable/disable WTP image download at join time.

option

-

Option

Description

enable

Enable WTP image download at join time.

disable

Disable WTP image download at join time.

max-retransmit

Maximum number of tunnel packet retransmissions .

integer

Minimum value: 0 Maximum value: 64

control-message-offload

Configure CAPWAP control message data channel offload.

option

-

Option

Description

ebp-frame

Ekahau blink protocol (EBP) frames.

aeroscout-tag

AeroScout tag.

ap-list

Rogue AP list.

sta-list

Rogue STA list.

sta-cap-list

STA capability list.

stats

WTP, radio, VAP, and STA statistics.

aeroscout-mu

AeroScout Mobile Unit (MU) report.

sta-health

STA health log.

data-ethernet-II

Configure the wireless controller to use Ethernet II or 802.3 frames with 802.3 data tunnel mode .

option

-

Option

Description

enable

Use Ethernet II frames with 802.3 data tunnel mode.

disable

Use 802.3 Ethernet frames with 802.3 data tunnel mode.

link-aggregation

Enable/disable calculating the CAPWAP transmit hash to load balance sessions to link aggregation nodes .

option

-

Option

Description

enable

Enable calculating the CAPWAP transmit hash.

disable

Disable calculating the CAPWAP transmit hash.

mesh-eth-type

Mesh Ethernet identifier included in backhaul packets .

integer

Minimum value: 8755 Maximum value: 8755

fiapp-eth-type

Ethernet type for Fortinet Inter-Access Point Protocol .

integer

Minimum value: 5252 Maximum value: 5252

discovery-mc-addr

Multicast IP address for AP discovery .

ipv4-address-multicast

Not Specified

max-clients

Maximum number of clients that can connect simultaneously .

integer

Minimum value: 0 Maximum value: 4294967295

rogue-scan-mac-adjacency

Maximum numerical difference between an AP's Ethernet and wireless MAC values to match for rogue detection .

integer

Minimum value: 0 Maximum value: 31

ipsec-base-ip

Base IP address for IPsec VPN tunnels between the access points and the wireless controller .

ipv4-address

Not Specified

wtp-share

Enable/disable sharing of WTPs between VDOMs.

option

-

Option

Description

enable

WTP can be shared between all VDOMs.

disable

WTP can be used only in its own VDOM.

ap-log-server

Enable/disable configuring APs or FortiAPs to send log messages to a syslog server .

option

-

Option

Description

enable

Enable AP log server.

disable

Disable AP log server.

ap-log-server-ip

IP address that APs or FortiAPs send log messages to.

ipv4-address

Not Specified

ap-log-server-port

Port that APs or FortiAPs send log messages to.

integer

Minimum value: 0 Maximum value: 65535