config system ntp

Configure system NTP information.

config system ntp

Description: Configure system NTP information.

set ntpsync [enable|disable]

set type [fortiguard|custom]

set syncinterval {integer}

config ntpserver

Description: Configure the FortiGate to connect to any available third-party NTP server.

edit <id>

set server {string}

set ntpv3 [enable|disable]

set authentication [enable|disable]

set key {password}

set key-id {integer}

set interface-select-method [auto|sdwan|...]

set interface {string}

next

end

set source-ip {ipv4-address}

set source-ip6 {ipv6-address}

set server-mode [enable|disable]

set authentication [enable|disable]

set key-type [MD5|SHA1]

set key {password}

set key-id {integer}

set interface <interface-name1>, <interface-name2>, ...

end

config system ntp

Parameter	Description	Type	Size
ntpsync	Enable/disable setting the FortiGate system time by synchronizing with an NTP Server.	option	-
	Option Description enable Enable synchronization with NTP Server. disable Disable synchronization with NTP Server.
type	Use the FortiGuard NTP server or any other available NTP Server.	option	-
	Option Description fortiguard Use the FortiGuard NTP server. custom Use any other available NTP server.
syncinterval	NTP synchronization interval .	integer	Minimum value: 1 Maximum value: 1440
source-ip	Source IP address for communication to the NTP server.	ipv4-address	Not Specified
source-ip6	Source IPv6 address for communication to the NTP server.	ipv6-address	Not Specified
server-mode	Enable/disable FortiGate NTP Server Mode. Your FortiGate becomes an NTP server for other devices on your network. The FortiGate relays NTP requests to its configured NTP server.	option	-
	Option Description enable Enable FortiGate NTP Server Mode. disable Disable FortiGate NTP Server Mode.
authentication	Enable/disable authentication.	option	-
	Option Description enable Enable authentication. disable Disable authentication.
key-type	Key type for authentication (MD5, SHA1).	option	-
	Option Description MD5 Use MD5 to authenticate the message. SHA1 Use SHA1 to authenticate the message.
key	Key for authentication.	password	Not Specified
key-id	Key ID for authentication.	integer	Minimum value: 0 Maximum value: 4294967295
interface <interface-name>	FortiGate interface(s) with NTP server mode enabled. Devices on your network can contact these interfaces for NTP services. Interface name.	string	Maximum length: 79

config ntpserver

Parameter	Description	Type	Size
server	IP address or hostname of the NTP Server.	string	Not Specified
ntpv3	Enable to use NTPv3 instead of NTPv4.	option	-
	Option Description enable Enable NTPv3. disable Disable NTPv3 (use NTPv4).
authentication	Enable/disable MD5(NTPv3)/SHA1(NTPv4) authentication.	option	-
	Option Description enable Enable MD5(NTPv3)/SHA1(NTPv4) authentication. disable Disable MD5(NTPv3)/SHA1(NTPv4) authentication.
key	Key for MD5(NTPv3)/SHA1(NTPv4) authentication.	password	Not Specified
key-id	Key ID for authentication.	integer	Minimum value: 0 Maximum value: 4294967295
interface-select-method	Specify how to select outgoing interface to reach server.	option	-
	Option Description auto Set outgoing interface automatically. sdwan Set outgoing interface by SD-WAN or policy routing rules. specify Set outgoing interface manually.
interface	Specify outgoing interface to reach server.	string	Not Specified