config firewall policy
Configure IPv4/IPv6 policies.
config firewall policy
Description: Configure IPv4/IPv6 policies.
edit <policyid>
set status [enable|disable]
set name {string}
set uuid {uuid}
set srcintf <name1>, <name2>, ...
set dstintf <name1>, <name2>, ...
set srcaddr <name1>, <name2>, ...
set dstaddr <name1>, <name2>, ...
set srcaddr6 <name1>, <name2>, ...
set dstaddr6 <name1>, <name2>, ...
set internet-service [enable|disable]
set internet-service-name <name1>, <name2>, ...
set internet-service-group <name1>, <name2>, ...
set internet-service-custom <name1>, <name2>, ...
set internet-service-custom-group <name1>, <name2>, ...
set internet-service-src [enable|disable]
set internet-service-src-name <name1>, <name2>, ...
set internet-service-src-group <name1>, <name2>, ...
set internet-service-src-custom <name1>, <name2>, ...
set internet-service-src-custom-group <name1>, <name2>, ...
set reputation-minimum {integer}
set reputation-direction [source|destination]
set src-vendor-mac <id1>, <id2>, ...
set rtp-nat [disable|enable]
set rtp-addr <name1>, <name2>, ...
set action [accept|deny|...]
set send-deny-packet [disable|enable]
set firewall-session-dirty [check-all|check-new]
set schedule {string}
set schedule-timeout [enable|disable]
set service <name1>, <name2>, ...
set tos {user}
set tos-mask {user}
set tos-negate [enable|disable]
set anti-replay [enable|disable]
set tcp-session-without-syn [all|data-only|...]
set geoip-anycast [enable|disable]
set geoip-match [physical-location|registered-location]
set dynamic-shaping [enable|disable]
set utm-status [enable|disable]
set inspection-mode [proxy|flow]
set http-policy-redirect [enable|disable]
set ssh-policy-redirect [enable|disable]
set webproxy-profile {string}
set profile-type [single|group]
set profile-group {string}
set profile-protocol-options {string}
set ssl-ssh-profile {string}
set av-profile {string}
set webfilter-profile {string}
set dnsfilter-profile {string}
set emailfilter-profile {string}
set dlp-sensor {string}
set file-filter-profile {string}
set ips-sensor {string}
set application-list {string}
set voip-profile {string}
set icap-profile {string}
set cifs-profile {string}
set waf-profile {string}
set ssh-filter-profile {string}
set logtraffic [all|utm|...]
set logtraffic-start [enable|disable]
set auto-asic-offload [enable|disable]
set np-acceleration [enable|disable]
set webproxy-forward-server {string}
set traffic-shaper {string}
set traffic-shaper-reverse {string}
set per-ip-shaper {string}
set nat [enable|disable]
set permit-any-host [enable|disable]
set permit-stun-host [enable|disable]
set fixedport [enable|disable]
set ippool [enable|disable]
set poolname <name1>, <name2>, ...
set poolname6 <name1>, <name2>, ...
set session-ttl {user}
set vlan-cos-fwd {integer}
set vlan-cos-rev {integer}
set inbound [enable|disable]
set outbound [enable|disable]
set natinbound [enable|disable]
set natoutbound [enable|disable]
set wccp [enable|disable]
set ntlm [enable|disable]
set ntlm-guest [enable|disable]
set ntlm-enabled-browsers <user-agent-string1>, <user-agent-string2>, ...
set fsso-agent-for-ntlm {string}
set groups <name1>, <name2>, ...
set users <name1>, <name2>, ...
set fsso-groups <name1>, <name2>, ...
set auth-path [enable|disable]
set disclaimer [enable|disable]
set email-collect [enable|disable]
set vpntunnel {string}
set natip {ipv4-classnet}
set match-vip [enable|disable]
set match-vip-only [enable|disable]
set diffserv-forward [enable|disable]
set diffserv-reverse [enable|disable]
set diffservcode-forward {user}
set diffservcode-rev {user}
set tcp-mss-sender {integer}
set tcp-mss-receiver {integer}
set comments {var-string}
set auth-cert {string}
set auth-redirect-addr {string}
set redirect-url {string}
set identity-based-route {string}
set block-notification [enable|disable]
set custom-log-fields <field-id1>, <field-id2>, ...
set replacemsg-override-group {string}
set srcaddr-negate [enable|disable]
set dstaddr-negate [enable|disable]
set service-negate [enable|disable]
set internet-service-negate [enable|disable]
set internet-service-src-negate [enable|disable]
set timeout-send-rst [enable|disable]
set captive-portal-exempt [enable|disable]
set decrypted-traffic-mirror {string}
set dsri [enable|disable]
set radius-mac-auth-bypass [enable|disable]
set delay-tcp-npu-session [enable|disable]
set vlan-filter {user}
next
end
config firewall policy
Parameter |
Description |
Type |
Size |
Default |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
status |
Enable or disable this policy. |
option |
- |
enable |
||||||||
|
|
|||||||||||
name |
Policy name. |
string |
Maximum length: 35 |
|
||||||||
uuid |
Universally Unique Identifier (UUID; automatically assigned but can be manually reset). |
uuid |
Not Specified |
00000000-0000-0000-0000-000000000000 |
||||||||
srcintf |
Incoming (ingress) interface. Interface name. |
string |
Maximum length: 79 |
|
||||||||
dstintf |
Outgoing (egress) interface. Interface name. |
string |
Maximum length: 79 |
|
||||||||
srcaddr |
Source IPv4 address and address group names. Address name. |
string |
Maximum length: 79 |
|
||||||||
dstaddr |
Destination IPv4 address and address group names. Address name. |
string |
Maximum length: 79 |
|
||||||||
srcaddr6 |
Source IPv6 address name and address group names. Address name. |
string |
Maximum length: 79 |
|
||||||||
dstaddr6 |
Destination IPv6 address name and address group names. Address name. |
string |
Maximum length: 79 |
|
||||||||
internet-service |
Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used. |
option |
- |
disable |
||||||||
|
|
|||||||||||
internet-service-name |
Internet Service name. Internet Service name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-group |
Internet Service group name. Internet Service group name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-custom |
Custom Internet Service name. Custom Internet Service name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-custom-group |
Custom Internet Service group name. Custom Internet Service group name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-src |
Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used. |
option |
- |
disable |
||||||||
|
|
|||||||||||
internet-service-src-name |
Internet Service source name. Internet Service name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-src-group |
Internet Service source group name. Internet Service group name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-src-custom |
Custom Internet Service source name. Custom Internet Service name. |
string |
Maximum length: 79 |
|
||||||||
internet-service-src-custom-group |
Custom Internet Service source group name. Custom Internet Service group name. |
string |
Maximum length: 79 |
|
||||||||
reputation-minimum |
Minimum Reputation to take action. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||
reputation-direction |
Direction of the initial traffic for reputation to take effect. |
option |
- |
destination |
||||||||
|
|
|||||||||||
src-vendor-mac |
Vendor MAC source ID. Vendor MAC ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|
||||||||
rtp-nat |
Enable Real Time Protocol (RTP) NAT. |
option |
- |
disable |
||||||||
|
|
|||||||||||
rtp-addr |
Address names if this is an RTP NAT policy. Address name. |
string |
Maximum length: 79 |
|
||||||||
action |
Policy action (accept/deny/ipsec). |
option |
- |
deny |
||||||||
|
|
|||||||||||
send-deny-packet |
Enable to send a reply when a session is denied or blocked by a firewall policy. |
option |
- |
disable |
||||||||
|
|
|||||||||||
firewall-session-dirty |
How to handle sessions if the configuration of this firewall policy changes. |
option |
- |
check-all |
||||||||
|
|
|||||||||||
schedule |
Schedule name. |
string |
Maximum length: 35 |
|
||||||||
schedule-timeout |
Enable to force current sessions to end when the schedule object times out. Disable allows them to end from inactivity. |
option |
- |
disable |
||||||||
|
|
|||||||||||
service |
Service and service group names. Service and service group names. |
string |
Maximum length: 79 |
|
||||||||
tos |
ToS (Type of Service) value used for comparison. |
user |
Not Specified |
|
||||||||
tos-mask |
Non-zero bit positions are used for comparison while zero bit positions are ignored. |
user |
Not Specified |
|
||||||||
tos-negate |
Enable negated TOS match. |
option |
- |
disable |
||||||||
|
|
|||||||||||
anti-replay |
Enable/disable anti-replay check. |
option |
- |
enable |
||||||||
|
|
|||||||||||
tcp-session-without-syn |
Enable/disable creation of TCP session without SYN flag. |
option |
- |
disable |
||||||||
|
|
|||||||||||
geoip-anycast |
Enable/disable recognition of anycast IP addresses using the geography IP database. |
option |
- |
disable |
||||||||
|
|
|||||||||||
geoip-match |
Match geography address based either on its physical location or registered location. |
option |
- |
physical-location |
||||||||
|
|
|||||||||||
dynamic-shaping |
Enable/disable dynamic RADIUS defined traffic shaping. |
option |
- |
disable |
||||||||
|
|
|||||||||||
utm-status |
Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy. |
option |
- |
disable |
||||||||
|
|
|||||||||||
inspection-mode |
Policy inspection mode (Flow/proxy). Default is Flow mode. |
option |
- |
flow |
||||||||
|
|
|||||||||||
http-policy-redirect |
Redirect HTTP(S) traffic to matching transparent web proxy policy. |
option |
- |
disable |
||||||||
|
|
|||||||||||
ssh-policy-redirect |
Redirect SSH traffic to matching transparent proxy policy. |
option |
- |
disable |
||||||||
|
|
|||||||||||
webproxy-profile |
Webproxy profile name. |
string |
Maximum length: 63 |
|
||||||||
profile-type |
Determine whether the firewall policy allows security profile groups or single profiles only. |
option |
- |
single |
||||||||
|
|
|||||||||||
profile-group |
Name of profile group. |
string |
Maximum length: 35 |
|
||||||||
profile-protocol-options |
Name of an existing Protocol options profile. |
string |
Maximum length: 35 |
default |
||||||||
ssl-ssh-profile |
Name of an existing SSL SSH profile. |
string |
Maximum length: 35 |
no-inspection |
||||||||
av-profile |
Name of an existing Antivirus profile. |
string |
Maximum length: 35 |
|
||||||||
webfilter-profile |
Name of an existing Web filter profile. |
string |
Maximum length: 35 |
|
||||||||
dnsfilter-profile |
Name of an existing DNS filter profile. |
string |
Maximum length: 35 |
|
||||||||
emailfilter-profile |
Name of an existing email filter profile. |
string |
Maximum length: 35 |
|
||||||||
dlp-sensor |
Name of an existing DLP sensor. |
string |
Maximum length: 35 |
|
||||||||
file-filter-profile |
Name of an existing file-filter profile. |
string |
Maximum length: 35 |
|
||||||||
ips-sensor |
Name of an existing IPS sensor. |
string |
Maximum length: 35 |
|
||||||||
application-list |
Name of an existing Application list. |
string |
Maximum length: 35 |
|
||||||||
voip-profile |
Name of an existing VoIP profile. |
string |
Maximum length: 35 |
|
||||||||
icap-profile |
Name of an existing ICAP profile. |
string |
Maximum length: 35 |
|
||||||||
cifs-profile |
Name of an existing CIFS profile. |
string |
Maximum length: 35 |
|
||||||||
waf-profile |
Name of an existing Web application firewall profile. |
string |
Maximum length: 35 |
|
||||||||
ssh-filter-profile |
Name of an existing SSH filter profile. |
string |
Maximum length: 35 |
|
||||||||
logtraffic |
Enable or disable logging. Log all sessions or security profile sessions. |
option |
- |
utm |
||||||||
|
|
|||||||||||
logtraffic-start |
Record logs when a session starts. |
option |
- |
disable |
||||||||
|
|
|||||||||||
auto-asic-offload |
Enable/disable policy traffic ASIC offloading. |
option |
- |
enable |
||||||||
|
|
|||||||||||
np-acceleration * |
Enable/disable UTM Network Processor acceleration. |
option |
- |
enable |
||||||||
|
|
|||||||||||
webproxy-forward-server |
Webproxy forward server name. |
string |
Maximum length: 63 |
|
||||||||
traffic-shaper |
Traffic shaper. |
string |
Maximum length: 35 |
|
||||||||
traffic-shaper-reverse |
Reverse traffic shaper. |
string |
Maximum length: 35 |
|
||||||||
per-ip-shaper |
Per-IP traffic shaper. |
string |
Maximum length: 35 |
|
||||||||
nat |
Enable/disable source NAT. |
option |
- |
disable |
||||||||
|
|
|||||||||||
permit-any-host |
Accept UDP packets from any host. |
option |
- |
disable |
||||||||
|
|
|||||||||||
permit-stun-host |
Accept UDP packets from any Session Traversal Utilities for NAT (STUN) host. |
option |
- |
disable |
||||||||
|
|
|||||||||||
fixedport |
Enable to prevent source NAT from changing a session's source port. |
option |
- |
disable |
||||||||
|
|
|||||||||||
ippool |
Enable to use IP Pools for source NAT. |
option |
- |
disable |
||||||||
|
|
|||||||||||
poolname |
IP Pool names. IP pool name. |
string |
Maximum length: 79 |
|
||||||||
poolname6 |
IPv6 pool names. IPv6 pool name. |
string |
Maximum length: 79 |
|
||||||||
session-ttl |
TTL in seconds for sessions accepted by this policy . |
user |
Not Specified |
|
||||||||
vlan-cos-fwd |
VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest. |
integer |
Minimum value: 0 Maximum value: 7 |
255 |
||||||||
vlan-cos-rev |
VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest. |
integer |
Minimum value: 0 Maximum value: 7 |
255 |
||||||||
inbound |
Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN. |
option |
- |
disable |
||||||||
|
|
|||||||||||
outbound |
Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN. |
option |
- |
enable |
||||||||
|
|
|||||||||||
natinbound |
Policy-based IPsec VPN: apply destination NAT to inbound traffic. |
option |
- |
disable |
||||||||
|
|
|||||||||||
natoutbound |
Policy-based IPsec VPN: apply source NAT to outbound traffic. |
option |
- |
disable |
||||||||
|
|
|||||||||||
wccp |
Enable/disable forwarding traffic matching this policy to a configured WCCP server. |
option |
- |
disable |
||||||||
|
|
|||||||||||
ntlm |
Enable/disable NTLM authentication. |
option |
- |
disable |
||||||||
|
|
|||||||||||
ntlm-guest |
Enable/disable NTLM guest user access. |
option |
- |
disable |
||||||||
|
|
|||||||||||
ntlm-enabled-browsers |
HTTP-User-Agent value of supported browsers. User agent string. |
string |
Maximum length: 79 |
|
||||||||
fsso-agent-for-ntlm |
FSSO agent to use for NTLM authentication. |
string |
Maximum length: 35 |
|
||||||||
groups |
Names of user groups that can authenticate with this policy. Group name. |
string |
Maximum length: 79 |
|
||||||||
users |
Names of individual users that can authenticate with this policy. Names of individual users that can authenticate with this policy. |
string |
Maximum length: 79 |
|
||||||||
fsso-groups |
Names of FSSO groups. Names of FSSO groups. |
string |
Maximum length: 511 |
|
||||||||
auth-path |
Enable/disable authentication-based routing. |
option |
- |
disable |
||||||||
|
|
|||||||||||
disclaimer |
Enable/disable user authentication disclaimer. |
option |
- |
disable |
||||||||
|
|
|||||||||||
email-collect |
Enable/disable email collection. |
option |
- |
disable |
||||||||
|
|
|||||||||||
vpntunnel |
Policy-based IPsec VPN: name of the IPsec VPN Phase 1. |
string |
Maximum length: 35 |
|
||||||||
natip |
Policy-based IPsec VPN: source NAT IP address for outgoing traffic. |
ipv4-classnet |
Not Specified |
0.0.0.0 0.0.0.0 |
||||||||
match-vip |
Enable to match packets that have had their destination addresses changed by a VIP. |
option |
- |
disable |
||||||||
|
|
|||||||||||
match-vip-only |
Enable/disable matching of only those packets that have had their destination addresses changed by a VIP. |
option |
- |
disable |
||||||||
|
|
|||||||||||
diffserv-forward |
Enable to change packet's DiffServ values to the specified diffservcode-forward value. |
option |
- |
disable |
||||||||
|
|
|||||||||||
diffserv-reverse |
Enable to change packet's reverse (reply) DiffServ values to the specified diffservcode-rev value. |
option |
- |
disable |
||||||||
|
|
|||||||||||
diffservcode-forward |
Change packet's DiffServ to this value. |
user |
Not Specified |
|
||||||||
diffservcode-rev |
Change packet's reverse (reply) DiffServ to this value. |
user |
Not Specified |
|
||||||||
tcp-mss-sender |
Sender TCP maximum segment size (MSS). |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||
tcp-mss-receiver |
Receiver TCP maximum segment size (MSS). |
integer |
Minimum value: 0 Maximum value: 65535 |
0 |
||||||||
comments |
Comment. |
var-string |
Maximum length: 1023 |
|
||||||||
auth-cert |
HTTPS server certificate for policy authentication. |
string |
Maximum length: 35 |
|
||||||||
auth-redirect-addr |
HTTP-to-HTTPS redirect address for firewall authentication. |
string |
Maximum length: 63 |
|
||||||||
redirect-url |
URL users are directed to after seeing and accepting the disclaimer or authenticating. |
string |
Maximum length: 255 |
|
||||||||
identity-based-route |
Name of identity-based routing rule. |
string |
Maximum length: 35 |
|
||||||||
block-notification |
Enable/disable block notification. |
option |
- |
disable |
||||||||
|
|
|||||||||||
custom-log-fields |
Custom fields to append to log messages for this policy. Custom log field. |
string |
Maximum length: 35 |
|
||||||||
replacemsg-override-group |
Override the default replacement message group for this policy. |
string |
Maximum length: 35 |
|
||||||||
srcaddr-negate |
When enabled srcaddr/srcaddr6 specifies what the source address must NOT be. |
option |
- |
disable |
||||||||
|
|
|||||||||||
dstaddr-negate |
When enabled dstaddr/dstaddr6 specifies what the destination address must NOT be. |
option |
- |
disable |
||||||||
|
|
|||||||||||
service-negate |
When enabled service specifies what the service must NOT be. |
option |
- |
disable |
||||||||
|
|
|||||||||||
internet-service-negate |
When enabled internet-service specifies what the service must NOT be. |
option |
- |
disable |
||||||||
|
|
|||||||||||
internet-service-src-negate |
When enabled internet-service-src specifies what the service must NOT be. |
option |
- |
disable |
||||||||
|
|
|||||||||||
timeout-send-rst |
Enable/disable sending RST packets when TCP sessions expire. |
option |
- |
disable |
||||||||
|
|
|||||||||||
captive-portal-exempt |
Enable to exempt some users from the captive portal. |
option |
- |
disable |
||||||||
|
|
|||||||||||
decrypted-traffic-mirror |
Decrypted traffic mirror. |
string |
Maximum length: 35 |
|
||||||||
dsri |
Enable DSRI to ignore HTTP server responses. |
option |
- |
disable |
||||||||
|
|
|||||||||||
radius-mac-auth-bypass |
Enable MAC authentication bypass. The bypassed MAC address must be received from RADIUS server. |
option |
- |
disable |
||||||||
|
|
|||||||||||
delay-tcp-npu-session |
Enable TCP NPU session delay to guarantee packet order of 3-way handshake. |
option |
- |
disable |
||||||||
|
|
|||||||||||
vlan-filter |
Set VLAN filters. |
user |
Not Specified |
|
* This parameter may not exist in some models.