Customizing user settings

1. Go to Preferences.
2. Configure the following fields:

   GUI field	Description
   User Setting
   Number	Displays your extension number (read-only).
   Display name	Displays the caller ID on the extension, usually the name of the extension user (read-only).
   Emergency caller ID	Displays the caller ID to display on the destination phone when the emergency number is dialed (read-only).
   External caller ID	Displays a particular caller ID on a called phone instead of the FortiVoice main number or the trunk phone number (read-only). Use the name<phone_number> format, such as jdoe<2221111234>. If you are unsure about this feature, contact your administrator for more information.
   Idle timeout	Enter the duration of time in minutes before you are logged out of the user portal. Set the value between 1 and 1440 minutes (maximum of one day).
   Picture ID	You can upload a picture ID file. When you place a call, the callee's phone displays the uploaded picture ID, if the phone model supports this feature. Before uploading a picture file, make sure that the file meets the following requirements: Supported formats: JPEG and PNG Width and height ratio: between 0.85 and 1.2 File size: 5 MB or less To upload a picture, click . To delete a picture, click .
   Change PIN number	Click to enter and confirm a new PIN for accessing your voicemail. You must enter your current PIN before choosing a new PIN.
   Change User Password	If you use LDAP as the authentication mode, this link is unavailable. Click to enter and confirm a new user password for accessing the user portal. You must enter your current password before choosing a new password.

3. To saves changes, click OK.