Starting a UDP Protocol SIP test
FortiTester tests UDP SIP by sending UDP frames with the specified SIP from the client ports to the server ports.
To start a UDP SIP test:
- Go to Cases > Performance Testing > Protocol > UDP > SIP to display the test case summary page.
- Click + Create New to display the Select case options dialog box.
- In the popup dialog, for the Network Config option, select the network template you have created in Cases > Security Testing > Objects > Networks. Then the network related options will automatically be filled. See Using network configuration templates for how to create a network template.
- Select a Certificate Group if applicable.
- Click OK to continue.
- Configure the test case options described below.
- Click Start to run the test case.
FortiTester saves the configuration automatically so you can run the test again later. You can also click Save to save the test case without running it.
|
Tip1: You can also copy an existing case, and change its settings to create a new case. In the case list, click Clone to clone the configuration. Only the case name is different from the original case. Tip 2: You can add or edit a comment when the test is running. This comment can be used to search for the test result in the Results page. This is useful especially when the test runs for a long time. |
Protocol Test Case common options
Protocol Test Case configuration specific to UDP SIP Test
| Settings | Guidelines |
|---|---|
| Client Profile | |
| From | This field indicates the initiator of the request. |
| To | This field specifies the logical recipient of the request. |
| Re-Transfer Time | Select a time limit after which FortiTester will resend the data packet. |
| Retry Limit | Select the number of times FortiTester will attempt a transfer. |