Using 40 G to 4 × 10 G fan out
FortiTester now supports 4 × 10 G fan out. This feature splits the 40 G port into four separate 10 G ports. Use the corresponding cable to link the 10 G ports to the DUT.
This is available only on FortiTester 3000E.
To enable fan-out:
- Go to System > Settings.
- Switch 40 G fan-out 4 × 10 G to Enabled.
- Click OK .
- Wait for the system to reboot.
After you have rebooted the system, the fan out should be enabled. You can check it from System > Settings.