Using 40G to 4 × 10G fan out
FortiTester now supports 4 × 10G fan out. This feature splits the 40G port into four separate 10G ports. Use the corresponding cable to link the 10G ports to the DUT.
This is available only on FortiTester 3000E.
To enable fan-out:
- Go to System > Settings.
- Switch 40G fan-out 4 × 10G to Enabled.
- Click OK .
- Wait for the system to reboot.
After you have rebooted the system, the fan out is enabled. You can check it in System > Settings.