Fortinet black logo

Introduction

This document provides the following information for FortiSwitchOS 7.2.5 build 0453.

See the Fortinet Document Library for FortiSwitchOS documentation.

Supported models

FortiSwitchOS 7.2.5 supports the following models:

FortiSwitch 1xx FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE
FortiSwitch 2xx FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE
FortiSwitch 4xx FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448E, FS-448E-POE, FS-448E-FPOE
FortiSwitch 5xx FS-524D, FS-524D-FPOE, FS-548D, FS-548D-FPOE

FortiSwitch 6xx

FS-624F, FS-624F-FPOE, FS-648F, FS-648F-FPOE

NOTE: Build 5293 supports these models.

FortiSwitch 1xxx FS-1024D, FS-1024E, FS-1048E, FS-T1024E

FortiSwitch 2xxx

FS-2048F

NOTE: Build 6071 supports these models.

FortiSwitch 3xxx FS-3032E
FortiSwitch Rugged FSR-112D-POE, FSR-124D, FSR-424F-POE

What’s new in FortiSwitchOS 7.2.5

Release 7.2.5 provides the following new features:

  • You can now specify in the CLI that the access control list (ACL) prelookup policy applies to all ingress interfaces. Previously, you could specify only a single interface.

  • EAP-FAST is now supported.

  • You can now split ports on the FS-T1024E and FS-1024E models. You can enable the maximum speed (100G) of ports 25 and 26; each split port has a maximum speed of 25G.

Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.

This document provides the following information for FortiSwitchOS 7.2.5 build 0453.

See the Fortinet Document Library for FortiSwitchOS documentation.

Supported models

FortiSwitchOS 7.2.5 supports the following models:

FortiSwitch 1xx FS-108E, FS-108E-POE, FS-108E-FPOE, FS-108F, FS-108F-POE, FS-108F-FPOE, FS-124E, FS-124E-POE, FS-124E-FPOE, FS-124F, FS-124F-POE, FS-124F-FPOE, FS-148E, FS-148E-POE, FS-148F, FS-148F-POE, FS-148F-FPOE
FortiSwitch 2xx FS-224D-FPOE, FS-224E, FS-224E-POE, FS-248D, FS-248E-POE, FS-248E-FPOE
FortiSwitch 4xx FS-424E, FS-424E-POE, FS-424E-FPOE, FS-424E-Fiber, FS-M426E-FPOE, FS-448E, FS-448E-POE, FS-448E-FPOE
FortiSwitch 5xx FS-524D, FS-524D-FPOE, FS-548D, FS-548D-FPOE

FortiSwitch 6xx

FS-624F, FS-624F-FPOE, FS-648F, FS-648F-FPOE

NOTE: Build 5293 supports these models.

FortiSwitch 1xxx FS-1024D, FS-1024E, FS-1048E, FS-T1024E

FortiSwitch 2xxx

FS-2048F

NOTE: Build 6071 supports these models.

FortiSwitch 3xxx FS-3032E
FortiSwitch Rugged FSR-112D-POE, FSR-124D, FSR-424F-POE

What’s new in FortiSwitchOS 7.2.5

Release 7.2.5 provides the following new features:

  • You can now specify in the CLI that the access control list (ACL) prelookup policy applies to all ingress interfaces. Previously, you could specify only a single interface.

  • EAP-FAST is now supported.

  • You can now split ports on the FS-T1024E and FS-1024E models. You can enable the maximum speed (100G) of ports 25 and 26; each split port has a maximum speed of 25G.

Refer to the FortiSwitch feature matrix for details about the features supported by each FortiSwitch model.