NetApp Data ONTAP

• Supported Version
• Configuration

Supported Version

FortiSIEM supports the latest NetApp ONTAP API version listed here.

• NetApp ONTAP API 8.2

Configuration

Setup in FortiSIEM

Complete these steps in the FortiSIEM UI:

1. Go to the ADMIN > Setup > Credentials tab.
2. In Step 1: Enter Credentials, click New to create a new credential.
   1. Follow the instructions in “Setting Credentials“ in the User's Guide to create a new credential.
   2. Enter these settings in the Access Method Definition dialog box:

      Settings	Description
      Name	Enter a name for the credential.
      Device Type	NetApp DataONTAP
      Access Protocol	NetApp ONTAPI
      Transport	- HTTP - HTTPS
      Pull Interval	5 minutes
      User Name	User name for device access
      Password	Password for device access
      Description	Description about the device
      Settings	Description

3. In Step 2: Enter IP Range to Credential Associations, click New to create a new mapping:
   1. Enter a host name, an IP, or an IP range in the IP/Host Name field.
   2. Select the name of your credential in step 2 from the Credentials drop-down list.
   3. Click Save.
4. Click the Test drop-down list and select Test Connectivity to test the connection to NetApp Data ONTAP.
5. To see the jobs associated with DataONTAP, select ADMIN > Setup > Pull Events.
6. To see the received events select ANALYTICS, then enter "DataONTAP" in the search box.