Imperva Securesphere DB Monitoring Gateway

Configuration in FortiSIEM

Complete these steps in the FortiSIEM UI:

1. Go to the ADMIN > Setup > Credentials tab.
2. In Step 1: Enter Credentials:
   1. Follow the instructions in “Setting Credentials“ in the User's Guide to create a new credential.
   2. Enter these settings in the Access Method Definition dialog box:

      Setting	Value
      Name	<set name>
      Device Type	Imperva Securesphere DB Monitoring Gateway
      Access Protocol	See Access Credentials
      Port	See Access Credentials
      Password config	See Password Configuration
      User Name	A user who has access credentials for the device
      Password	The password for the user
      Super Password	Password for Super

3. In Step 2, Enter IP Range to Credential Associations:
   1. Select the name of your credential from the Credentials drop-down list.
   2. Enter a host name, an IP, or an IP range in the IP/Host Name field.
   3. Click Save.
4. Click Test to test the connection to Imperva Securesphere DB Monitoring Gateway.
5. To see the jobs associated with Imperva, select ADMIN > Pull Events.
6. To see the received events select ANALYTICS, then enter Imperva in the search box.