Fortinet black logo

External Systems Configuration Guide

Liebert FPC

Liebert FPC

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, Hardware model, Network interfaces

Output voltage (X-N, Y-N, Z-N), Output current (X, Y. Z), Neutral Current, Ground current, Output power, Power Factor, Output Frequency, Output Voltage THD (Vx, Vy, Vz), Output Current THD (Lx, Ly. Lz), Output KWh, Output Crest factor (Lx, Ly, Lz), Output K-factor (Lx, Ly, Lz), Output Lx Capacity, output Ly capacity

Availability and Performance Monitoring

Event Types

In ADMIN > Device Support > Event, search for "LIebert FPC" in the Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

In RESOURCE > Reports , search for "Liebert FPC" in the Name column to see the reports associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Liebert FPC
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Liebert FPC

Liebert FPC

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, Hardware model, Network interfaces

Output voltage (X-N, Y-N, Z-N), Output current (X, Y. Z), Neutral Current, Ground current, Output power, Power Factor, Output Frequency, Output Voltage THD (Vx, Vy, Vz), Output Current THD (Lx, Ly. Lz), Output KWh, Output Crest factor (Lx, Ly, Lz), Output K-factor (Lx, Ly, Lz), Output Lx Capacity, output Ly capacity

Availability and Performance Monitoring

Event Types

In ADMIN > Device Support > Event, search for "LIebert FPC" in the Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

In RESOURCE > Reports , search for "Liebert FPC" in the Name column to see the reports associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Liebert FPC
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration