Apache Web Server

• What is Discovered and Monitored
• Configuration
• Settings for Access Credentials

What is Discovered and Monitored

Protocol	Information discovered	Metrics collected	Used for
SNMP	Application type	Process level metrics: CPU utilization, Memory utilization	Performance Monitoring
HTTP(S) via the mod-status module		Apachemetrics: Uptime, CPU load, Total Accesses, Total Bytes Connections, Requests/sec, Bytes/sec, Bytes/req, Busy Workers, Idle Workers	Performance Monitoring
Syslog	Application type	W3C access logs: attributes include Client IP, URL, User Agent, Referrer, HTTP Version, HTTP Method, HTTP Status Code, Sent Bytes, Received Bytes, Connection Duration	Security Monitoring and compliance

Event Types

In ADMIN > Device Support > Event, search for "apache" in the Device Type and Description column to see the event types associated with this device.

Reports

In RESOURCE > Reports , search for "apache" in the Name column to see the reports associated with this device.

Configuration

SNMP

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

HTTPS

To communicate with FortiSIEM over HTTPS, you must configure the mod_status module in your Apache web server.

1. Log in to your web server as an administrator.
2. Open the configuration file /etc/Httpd.conf.
3. Modify the file as shown in these code blocks, depending on whether you are connecting over HTTP without authentication, or over HTTPS with authentication.
   Without Authentication

      LoadModule status_module modules/mod_status.so
      ...
      ExtendedStatus on
      ...
      #Configuration without authentication
      <Location /server-status>       SetHandler server-status
          Order Deny,Allow
          Deny from all
          Allow from .foo.com
      </Location>
   

   With Authentication

      LoadModule status_module modules/mod_status.so
      ...
      ExtendedStatus on
      ...
      #Configuration with authentication
      <Location /server-status>      SetHandler server-status
         Order deny,allow
         Deny from all
         Allow from all
         AuthType Basic
         AuthUserFile /etc/httpd/account/users
         AuthGroupFile /etc/httpd/account/groups
         AuthName "Admin"      Require group admin
         Satisfy all
     </Location>

4. If you are using authentication, you will have to add user authentication credentials.
   1. Go to /etc/httpd, and if necessary, create an account directory.
   2. In the account directory, create two files, users and groups.
   3. In the groups file, enter admin:admin.

   4. Create a password for the admin user.

      htpasswd --c users admin

5. Reload Apache.

   /etc/init.d/httpd reload

You can now configure FortiSIEM to communicate with your device. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Syslog

Install and configure Epilog application to send syslog to FortiSIEM

1. Download Epilog from Epilog download site and install it on your Windows Server.
2. For Windows, launch Epilog from Start→All Programs→InterSect Alliance→Epilog for windows
   
3. For Linux, enter http://<yourApacheServerIp>:6162
4. Configure Epilog application as follows
   1. Go to Log Configuration. Click the Add button and add the following log files to be sent to FortiSIEM
      • /etc/httpd/logs/access_log
      • /etc/httpd/logs/ssl_access_log
   2. Go to Network Configuration
      1. Set AO System IP(all-in-1 or collector) in Destination Server address (10.1.2.20 here);
      2. Set 514 in Destination Port text area
      3. Click Change Configuration to save the configuration
   3. Apply the Latest Audit Configuration. Apache logs will now sent to FortiSIEM in real time.
      

Define the Apache Log Format

You must define the format of the logs that Apache will send to FortiSIEM.

1. Open the file /etc/httpd/conf.d/ssl.conf for editing.
2. Add this line to the file.

   CustomLog logs/ssl_request_log combined
   

3. Uncomment this line in the file.

   #CustomLog logs/access_log common
   

4. Add this line to the file.

   CustomLog logs/access_log combined
   

5. Reload Apache.

   /etc/init.d/httpd reload

Apache Syslog Log Format

<142>Sep 17 13:27:37 SJ-Dev-S-RH-VMW-01.prospecthills.net ApacheLog   192.168.20.35 - - [17/Sep/2009:13:27:37 -0700] "GET /icons/apache_pb2.gif HTTP/1.1" 200 2414 "http://192.168.0.30/" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)"<134>Mar  4 17:08:04 137.146.28.68 httpd: [ID 702911 local0.info] 192.168.20.38 - - [04/Mar/2010:16:35:21 -0800] "GET /bugzilla-3.0.4/ HTTP/1.1" 200 10791 "-" "Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 GTB6"<142>Sep 17 13:27:37 135.134.33.23 HTTP: [ID 702911 local0.info] 192.168.20.38 - - [04/Mar/2010:16:35:21 -0800] "GET /bugzilla-3.0.4/ HTTP/1.1" 200 10791 "-" "Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.8) Gecko/20100202 Firefox/3.5.8 GTB6"

Settings for Access Credentials

SNMP Access Credentials for All Devices

Use these Access Method Definition settings to allow FortiSIEM to communicate with your device over SNMP. Set the Name and Community String.

Setting	Value
Name	<set name>
Device Type	Generic
Access Protocol	SNMP
Community String	<your own>

Settings for Apache Web Server HTTPS Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to communicate with your Apache web server over https.

Setting	Value
Name	Apache-https
Device Type	generic
Access Protocol	HTTP or HTTPS
Port	80 (HTTP) or 443 (HTTPS)
URL	server-status?auto
User Name	The admin account you created when configuring HTTPS
Password	The password associated with the admin account