Fortinet black logo

External Systems Configuration Guide

AirTight Networks SpectraGuard

AirTight Networks SpectraGuard

What is Discovered and Monitored

Protocol Information Discovered Metrics Collected Used For
Syslog

Event Types

In ADMIN > Device Support > Event, search for "airtight" in the Device Type column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Syslog

FortiSIEM processes events from this device via syslogs sent by the device. Configure the device to send syslogs to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.

  • For Syslog Server, or the server where the syslogs should be sent, enter the IP address of your FortiSIEM virtual appliance.
  • For Port, enter 514.
  • Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Airtight SpectraGuard
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Example Syslog

<30><2013.09.09 19:45:16>CEF:0|AirTight|SpectraGuard Enterprise|6.7|5.51.515|
Authorized AP operating on non-allowed channel|3|msg=Stop: 
Authorized AP [AP2.12.c11d] is operating on non-allowed channel.
rt=Sep 09 2013 19:45:16 UTC dvc=10.255.1.36 externalId=726574 
dmac=58:BF:EA:FA:26:EF cs1Label=TargetDeviceName 
cs1=AP2.12.c11d cs2Label=SSID cs2=WiFiHiSpeed cs3Label=SecuritySetting 
cs3=802.11i cn1Label=RSSI_dBm cn1=-50 cn2Label=Channel cn2=149 
cs4Label=Locationcs4=//FB/FBFL2

AirTight Networks SpectraGuard

What is Discovered and Monitored

Protocol Information Discovered Metrics Collected Used For
Syslog

Event Types

In ADMIN > Device Support > Event, search for "airtight" in the Device Type column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

Syslog

FortiSIEM processes events from this device via syslogs sent by the device. Configure the device to send syslogs to FortiSIEM as directed in the device's product documentation, and FortiSIEM will parse the contents.

  • For Syslog Server, or the server where the syslogs should be sent, enter the IP address of your FortiSIEM virtual appliance.
  • For Port, enter 514.
  • Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting Value
Name <set name>
Device Type Airtight SpectraGuard
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Password Configuration

Example Syslog

<30><2013.09.09 19:45:16>CEF:0|AirTight|SpectraGuard Enterprise|6.7|5.51.515|
Authorized AP operating on non-allowed channel|3|msg=Stop: 
Authorized AP [AP2.12.c11d] is operating on non-allowed channel.
rt=Sep 09 2013 19:45:16 UTC dvc=10.255.1.36 externalId=726574 
dmac=58:BF:EA:FA:26:EF cs1Label=TargetDeviceName 
cs1=AP2.12.c11d cs2Label=SSID cs2=WiFiHiSpeed cs3Label=SecuritySetting 
cs3=802.11i cn1Label=RSSI_dBm cn1=-50 cn2Label=Channel cn2=149 
cs4Label=Locationcs4=//FB/FBFL2