Fortinet black logo

External Systems Configuration Guide

Liebert HVAC

Liebert HVAC

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, Hardware model, Network interfaces

HVAC metrics: Temperature: current value, upper threshold, lower threshold, Relative Humidity: current value, upper threshold, lower threshold, System state, Cooling state, Heating state, Humidifying state, Dehumidifying state, Economic cycle, Fan state, Heating capacity, Cooling capacity

Availability and Performance Monitoring

FortiSIEM uses SNMP to discover and collector metrics from Generic UPS devices. This requires the presence of UPS-MIB on the UPS device.

See the Liebert HVAC documentation to enable FortiSIEM to poll the device via SNMP.

Event Types

In ADMIN > Device Support > Event, search for "Liebert HVAC" in the Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

In RESOURCE > Reports , search for "Liebert HVAC" in the Name column to see the reports associated with this device.

Configuration

SNMP

Note: UPS-MIB Required

Your device must have a UPS-MIB database to communicate with FortiSIEM.

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Liebert HVAC
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Access Credentials

Liebert HVAC

What is Discovered and Monitored

Protocol

Information Discovered

Metrics collected

Used for

SNMP (V1, V2c)

Host name, Hardware model, Network interfaces

HVAC metrics: Temperature: current value, upper threshold, lower threshold, Relative Humidity: current value, upper threshold, lower threshold, System state, Cooling state, Heating state, Humidifying state, Dehumidifying state, Economic cycle, Fan state, Heating capacity, Cooling capacity

Availability and Performance Monitoring

FortiSIEM uses SNMP to discover and collector metrics from Generic UPS devices. This requires the presence of UPS-MIB on the UPS device.

See the Liebert HVAC documentation to enable FortiSIEM to poll the device via SNMP.

Event Types

In ADMIN > Device Support > Event, search for "Liebert HVAC" in the Description column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

In RESOURCE > Reports , search for "Liebert HVAC" in the Name column to see the reports associated with this device.

Configuration

SNMP

Note: UPS-MIB Required

Your device must have a UPS-MIB database to communicate with FortiSIEM.

FortiSIEM uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation. For more information, refer to sections "Discovery Settings" and "Setting Credentials" in the User Guide.

Settings for Access Credentials

Use these Access Method Definition settings to allow FortiSIEM to access your device.

Setting Value
Name <set name>
Device Type Liebert HVAC
Access Protocol See Access Credentials
Port See Access Credentials
Password config See Access Credentials