Cisco VPN 3000 Gateway

• What is Discovered and Monitored
• Configuration
• Settings for Access Credentials

What is Discovered and Monitored

Protocol	Information Discovered	Metrics Collected	Used For
SNMP
Syslog

Event Types

In ADMIN > Device Support > Event, search for "cisco_vpn" in the Name and Device Type column to see the event types associated with this device.

Rules

There are no predefined rules for this device.

Reports

There are no predefined reports for this device.

Configuration

SNMP

1. Log in to your device with administrative credentials.
2. Go to Configuration > System > Management Protocols > SNMP Communities.
3. Click Add.
4. For Community String, enter public.

Syslog

1. Go to Configuration > System > Events > Syslog Servers.
2. Click Add.
3. Enter the IP address of your FortiSIEM virtual appliance for Syslog Server.
4. Add a syslog server with FortiSIEM IP Address
   

Sample Parsed Cisco VPN 3000 Syslog Messages

<189>18174 01/07/1999 20:25:27.210 SEV=5 AUTH/31 RPT=14  User [ admin ] Protocol [ Telnet ] attempted ADMIN logon. Status: <REFUSED> authentication failure

Settings for Access Credentials

Set these Access Method Definition values to allow FortiSIEM to communicate with your device.

Setting	Value
Name	<set name>
Device Type	Cisco VPN 3K
Access Protocol	See Access Credentials
Port	See Access Credentials
Password config	See Password Configuration