Fortinet black logo

Administration Guide

GUI

Copy Link
Copy Doc ID 4f5a6250-a945-11ec-9fd1-fa163e15d75b:196014
Download PDF

GUI

The GUI is a user-friendly interface for configuring settings and managing the FortiSandbox unit. Access the GUI from a web browser on any management computer.

Connecting to the GUI

The FortiSandbox unit is configured and managed using the GUI. This topic covers connecting to the unit via the GUI.

To connect to the FortiSandbox GUI:
  1. Connect the port1 (administration) interface or any other administrative port set through the CLI command set admin-port to a management computer using an Ethernet cable.
  2. Configure the management computer to be on the same subnet as the internal interface of the FortiSandbox unit:
    1. Browse to Network and Sharing Center > Change adapter settings > Local Area Connection Properties > Internet Protocol Version 4 (TCP/IPv4) Properties. These directions may vary based on the version of your operating system.
    2. Change the IP address of the management computer to 192.168.0.2 and the network mask to 255.255.255.0.
  3. Start a supported web browser and browse to https://192.168.0.99.
  4. Type admin in the Name field, enter the Password, and click Login.

    You can now proceed with configuring your FortiSandbox unit.

Note

If the interfaces have been configured differently during installation, the URL and/or permitted administrative access protocols may no longer be in their default state.

GUI interface

The GUI interface displays a green banner at the top showing system information and command buttons.

The following options are available:

Refresh

Click the Refresh icon to refresh the page.

Note

For some pages such as Scan Job > File Job Search, if you click Refresh, you lose your current search criteria. Use the Refresh icon inside the content pane to continue searching without losing your criteria.

CLI Console

Click the CLI Console button >__ to open the CLI Console pane. See CLI .

Notifications

The bell icon displays messages and notifications that require your attention.

Online Help and Video Tutorials

The question mark icon lets you quickly access the Online Help and Video Tutorials.

Online Help links to this Administration Guide in the Fortinet Document Library where you can find information about FortiSandbox and other Fortinet products.

Video Tutorials links to the Fortinet Video Library for FortiSandbox at https://video.fortinet.com/product/fortisandbox where you can find video tutorials showing how to integrate other Fortinet products, including FortiGates, to FortiSandbox.

User

The user dropdown list lets you change the user password or logout.

GUI

The GUI is a user-friendly interface for configuring settings and managing the FortiSandbox unit. Access the GUI from a web browser on any management computer.

Connecting to the GUI

The FortiSandbox unit is configured and managed using the GUI. This topic covers connecting to the unit via the GUI.

To connect to the FortiSandbox GUI:
  1. Connect the port1 (administration) interface or any other administrative port set through the CLI command set admin-port to a management computer using an Ethernet cable.
  2. Configure the management computer to be on the same subnet as the internal interface of the FortiSandbox unit:
    1. Browse to Network and Sharing Center > Change adapter settings > Local Area Connection Properties > Internet Protocol Version 4 (TCP/IPv4) Properties. These directions may vary based on the version of your operating system.
    2. Change the IP address of the management computer to 192.168.0.2 and the network mask to 255.255.255.0.
  3. Start a supported web browser and browse to https://192.168.0.99.
  4. Type admin in the Name field, enter the Password, and click Login.

    You can now proceed with configuring your FortiSandbox unit.

Note

If the interfaces have been configured differently during installation, the URL and/or permitted administrative access protocols may no longer be in their default state.

GUI interface

The GUI interface displays a green banner at the top showing system information and command buttons.

The following options are available:

Refresh

Click the Refresh icon to refresh the page.

Note

For some pages such as Scan Job > File Job Search, if you click Refresh, you lose your current search criteria. Use the Refresh icon inside the content pane to continue searching without losing your criteria.

CLI Console

Click the CLI Console button >__ to open the CLI Console pane. See CLI .

Notifications

The bell icon displays messages and notifications that require your attention.

Online Help and Video Tutorials

The question mark icon lets you quickly access the Online Help and Video Tutorials.

Online Help links to this Administration Guide in the Fortinet Document Library where you can find information about FortiSandbox and other Fortinet products.

Video Tutorials links to the Fortinet Video Library for FortiSandbox at https://video.fortinet.com/product/fortisandbox where you can find video tutorials showing how to integrate other Fortinet products, including FortiGates, to FortiSandbox.

User

The user dropdown list lets you change the user password or logout.