Fortinet black logo

Administration Guide

Edit administrative access

Copy Link
Copy Doc ID 4f5a6250-a945-11ec-9fd1-fa163e15d75b:415523
Download PDF

Edit administrative access

Administrative access rights can only be set on port1. All other administrative ports follow port1 settings.

The port1 interface or any other administrative port set through the CLI command set admin-port is used for administrative access to FortiSandbox. HTTPS is enabled by default. You can edit this interface to enable HTTP, SSH, and Telnet support.

To edit administrative access:
  1. Go to System > Interfaces.
  2. Select an administrative interface and click Edit.
  3. Edit the IP address.
  4. To change the Interface Status, click its icon.
  5. Select the Access Rights for HTTP, SSH, and Telnet.
  6. Click OK.

Edit administrative access

Administrative access rights can only be set on port1. All other administrative ports follow port1 settings.

The port1 interface or any other administrative port set through the CLI command set admin-port is used for administrative access to FortiSandbox. HTTPS is enabled by default. You can edit this interface to enable HTTP, SSH, and Telnet support.

To edit administrative access:
  1. Go to System > Interfaces.
  2. Select an administrative interface and click Edit.
  3. Edit the IP address.
  4. To change the Interface Status, click its icon.
  5. Select the Access Rights for HTTP, SSH, and Telnet.
  6. Click OK.