Create network interfaces

Create the following network interfaces:

• The first network interface is for FortiSandbox port1.
• The second network interface is for FortiSandbox port2.

• If needed, you can create more network interfaces, such as for client devices to submit files, or inter-communications between HA Cluster nodes. To do that, more network security groups and virtual networks might be needed.

To create a network interface in Azure:

1. In the Azure portal, click Network interfaces in the left pane.
2. Click Add to create a new network interface.

   

3. Enter the following information:

   Name	VM name.
   Virtual network	Select your Virtual Network.
   Subnet	One subnet under your Virtual Network. Each interface you create must be on a different subnet.
   Private IP address assignment	Static.
   Private IP address	Self-defined static IP address.
   Network security group	Select the security group you created.
   Private IP address (IPv6)	Unchecked.
   Subscription	Subscription type.
   Resource group	The resource group you created in the Create a resource group step.
   Location	Select the same location used while setting up the resource group.

4. Repeat these steps to create the network interfaces you need.

   If you have created multiple network security groups: The group associated with the FSA port1 interface must be one included in HTTPS (TCP 443), SSH traffic (TCP 22), OFTP traffic (TCP 514). The group associated with the FSA port2 interface must be one including FTP(TCP 21).

   Associate the network interface used for the FSA management port (port1) with the Public IP address in the IP configuration section.