Setup
If you did not use one of the quick setup scenarios — or later want to change settings — then you can use these instructions.
When you initially install FortiRecorder, or after a configuration reset or clean install, you must perform these steps in order:
- Deployment topology
- Connecting to the FortiRecorder GUI or CLI
- Setting the "admin" account password
-
Network settings, including:
- Configuring network interfaces
- Configuring routing
- Configuring DNS settings
-
DHCP server settings, either:
- (Remote network deployments) Firewall/router settings:
- (Optional) Configuring the system time
- (Optional) Updating the firmware
- Upload licenses
-
- (Remote network deployments) Discovering cameras in remote networks
-
Camera settings, including:
- (Optional) Configuring video profiles
- (Optional) Configuring camera profiles
- Configuring cameras
This results in a basic, functional configuration where you can log in and cameras are connected to FortiRecorder. Optional steps can be skipped if you want to use factory default settings.
If you want to add more administrator or user accounts, set up alert email, or configure more advanced settings, continue with More system settings.